Double Check #14

salrodri · 2022-10-24T15:33:23Z

salrodri
Oct 24, 2022

Hi, I programed this board WT32_ETH01 with ESP3D. https://github.com/luc-github/ESP3D

ESP3D is used to add Wi-Fi to a 3D printer. (Serial/Wi-Fi bridge using configurable port 8888)

I was able to flash this board with thee EP3D firmware and it seems to be working correctly.

My question is.
Once I connect the WT32_ETH01 to my router through the port RJ45. How do I know if the board is connecting trough Ethernet instead of internet?

thank you,

khoih-prog · 2022-10-24T17:57:11Z

khoih-prog
Oct 24, 2022
Maintainer

It must be WiFi as the library currently has no code to support WT32_ETH01 Ethernet.
You can post an enhancement request issue or modify by yourself that good and powerful ESP3D library to support WT32_ETH01

I'll possibly port that library later, if having time and enough interests, to support many other powerful boards, such as WT32_ETH01, Portenta_H7, Teensy 4.1, ESP8266 using W5500/ENC28J60 Ethenet, RP2040 / RP2040W, etc. to work with my current AsyncWebServer libraries

0 replies

salrodri · 2022-10-24T18:31:52Z

salrodri
Oct 24, 2022
Author

Thank you for answering my question. I will post an enhancement request. I do not feel confident enough to do it by myself. Alternatively could I use a raspberry pi with octoprint. Would this be possible? Would this work over ethernet? I am working on a project that requests to control a 3D printer wireless and also have a port for ethernet. How would you do it? Please point me in the right direction. thank you,

…

On Mon, Oct 24, 2022 at 11:57 AM Khoi Hoang ***@***.***> wrote: *It must be WiFi* as the library currently has no code to support WT32_ETH01 Ethernet. You can post an enhancement request issue or modify by yourself that good and powerful *ESP3D* library <https://github.com/luc-github/ESP3D> to support WT32_ETH01 I'll possibly port that library later, if having time and enough interests, to support many other powerful boards, such as WT32_ETH01, Portenta_H7, Teensy 4.1, ESP8266 using W5500/ENC28J60 Ethenet, RP2040 / RP2040W, etc. to work with my current *AsyncWebServer* libraries 1. *AsyncWebServer_WT32_ETH01* <https://github.com/khoih-prog/AsyncWebServer_WT32_ETH01> 2. *Portenta_H7_AsyncWebServer* <https://github.com/khoih-prog/Portenta_H7_AsyncWebServer> 3. *AsyncWebServer_Teensy41* <https://github.com/khoih-prog/AsyncWebServer_Teensy41> 4. *AsyncWebServer_Ethernet* <https://github.com/khoih-prog/AsyncWebServer_Ethernet> 5. *AsyncWebServer_RP2040W* <https://github.com/khoih-prog/AsyncWebServer_RP2040W> — Reply to this email directly, view it on GitHub <#14 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASSK2RG6KE7WXGR43GNOBE3WE3EYFANCNFSM6AAAAAARNDFMPY> . You are receiving this because you authored the thread.Message ID: <khoih-prog/WebServer_WT32_ETH01/repo-discussions/14/comments/3953646@ github.com>

0 replies

khoih-prog · 2022-10-24T18:39:06Z

khoih-prog
Oct 24, 2022
Maintainer

Alternatively could I use a raspberry pi with octoprint. Would this be possible?

Anything is possible, just requiring knowledge, preparation and time. Harder to program for full RPi (RPi 3, RPi 4) than RPI-pico

Would this work over ethernet?

I don't see why not, just programming the correct way.

I am working on a project that requests to control a 3D printer wireless
and also have a port for ethernet.

Simplest and easiest way is to use WT32_ETH01 as you correctly selected.

How would you do it?
Please point me in the right direction.

Sorry I don't have time for this now. Please post the request on Arduino Forum, etc. But I doubt anybody would have time to help you with this complex project.

Good Luck,

0 replies

salrodri · 2022-10-24T19:02:26Z

salrodri
Oct 24, 2022
Author

Understood. I greatly appreciate your feedback. thank you,

…

On Mon, Oct 24, 2022 at 12:39 PM Khoi Hoang ***@***.***> wrote: Alternatively could I use a raspberry pi with octoprint. Would this be possible? Anything is possible, just requiring knowledge, preparation and time. Harder to program for full RPi (RPi 3, RPi 4) than RPI-pico Would this work over ethernet? I don't see why not, just programming the correct way. I am working on a project that requests to control a 3D printer wireless and also have a port for ethernet. *Simplest and easiest way is to use WT32_ETH01 as you correctly selected.* How would you do it? Please point me in the right direction. Sorry I don't have time for this now. Please post the request on Arduino Forum, etc. But I doubt anybody would have time to help you with this complex project. Good Luck, — Reply to this email directly, view it on GitHub <#14 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASSK2RAIL4324VDLXJXPT5LWE3JVJANCNFSM6AAAAAARNDFMPY> . You are receiving this because you authored the thread.Message ID: <khoih-prog/WebServer_WT32_ETH01/repo-discussions/14/comments/3953963@ github.com>

0 replies

khoih-prog · 2022-10-24T19:14:05Z

khoih-prog
Oct 24, 2022
Maintainer

It seems that in v3.0+ has some support for WT32_ETH01 in ESP32 ETH support
and

https://github.com/luc-github/ESP3D/blob/102192528dbad3fac9235663fe93464b42f300ed/esp3d/configuration.h#L100-L108

/* Use WiFi
* Enable wifi communications
*/
#define WIFI_FEATURE

/* Use Ethernet
* Enable ethernet communications
*/
//#define ETH_FEATURE

You have to read and verify if it's working first before posting the enhancement request.

0 replies

salrodri · 2022-10-24T19:27:02Z

salrodri
Oct 24, 2022
Author

I really appreciate it!! I will look into it today. Thank you very much!!

…

On Mon, Oct 24, 2022 at 1:14 PM Khoi Hoang ***@***.***> wrote: It seems that in v3.0+ has some support for WT32_ETH01 in *ESP32 ETH support* <https://github.com/luc-github/ESP3D/tree/3.0/esp3d/src/modules/ethernet> and https://github.com/luc-github/ESP3D/blob/102192528dbad3fac9235663fe93464b42f300ed/esp3d/configuration.h#L100-L108 /* Use WiFi * Enable wifi communications */ #define WIFI_FEATURE /* Use Ethernet * Enable ethernet communications */ //#define ETH_FEATURE You have to read and verify if it's working first before posting the enhancement request. — Reply to this email directly, view it on GitHub <#14 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASSK2RETXZ6PCT2LJPWG3OLWE3NYPANCNFSM6AAAAAARNDFMPY> . You are receiving this because you authored the thread.Message ID: <khoih-prog/WebServer_WT32_ETH01/repo-discussions/14/comments/3954208@ github.com>

0 replies

salrodri · 2022-10-24T19:45:36Z

salrodri
Oct 24, 2022
Author

This is awesome !! I can also add bluetooth !!

…

On Mon, Oct 24, 2022 at 1:27 PM Sal Rodriguez ***@***.***> wrote: I really appreciate it!! I will look into it today. Thank you very much!! On Mon, Oct 24, 2022 at 1:14 PM Khoi Hoang ***@***.***> wrote: > It seems that in v3.0+ has some support for WT32_ETH01 in *ESP32 ETH > support* > <https://github.com/luc-github/ESP3D/tree/3.0/esp3d/src/modules/ethernet> > and > > > https://github.com/luc-github/ESP3D/blob/102192528dbad3fac9235663fe93464b42f300ed/esp3d/configuration.h#L100-L108 > > /* Use WiFi > * Enable wifi communications > */ > #define WIFI_FEATURE > > /* Use Ethernet > * Enable ethernet communications > */ > //#define ETH_FEATURE > > You have to read and verify if it's working first before posting the > enhancement request. > > — > Reply to this email directly, view it on GitHub > <#14 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ASSK2RETXZ6PCT2LJPWG3OLWE3NYPANCNFSM6AAAAAARNDFMPY> > . > You are receiving this because you authored the thread.Message ID: > <khoih-prog/WebServer_WT32_ETH01/repo-discussions/14/comments/3954208@ > github.com> >

0 replies

khoih-prog · 2022-10-24T19:47:53Z

khoih-prog
Oct 24, 2022
Maintainer

Great. Please share your experience (modifications, settings, success, etc.) here with other interested people, including me.

0 replies

salrodri · 2022-10-24T20:08:47Z

salrodri
Oct 24, 2022
Author

Of course. I would be doing more testing. then will post my results and of course give you credit. thank you Mr. Khoih,

…

On Mon, Oct 24, 2022 at 1:48 PM Khoi Hoang ***@***.***> wrote: Great. Please share your experience (modifications, settings, success, etc.) here with other interested people, including me. — Reply to this email directly, view it on GitHub <#14 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASSK2RG54Y6I665C3JAHFVLWE3RXHANCNFSM6AAAAAARNDFMPY> . You are receiving this because you authored the thread.Message ID: <khoih-prog/WebServer_WT32_ETH01/repo-discussions/14/comments/3954429@ github.com>

0 replies

khoih-prog · 2022-10-24T21:37:37Z

khoih-prog
Oct 24, 2022
Maintainer

To help you to work with ESP32 v2.0.5+

Compile for ESP8266 is OK.

To use WT32_ETH01, you better use with ESP32 core 2.0.0+, such as current core v2.0.5

But for ESP32, using latest core v2.0.5 + ESP3D v3.0.0-alpha3, there are many compile errors

Bug in arduinoWebSockets using even ESPAsyncTCP library for ESP32

https://github.com/Links2004/arduinoWebSockets/blob/323592f622e0ec8f9ce1f995c5777d9bbaaae1ec/src/WebSockets.h#L134-L147

#if defined(ESP8266)
  #include <ESP8266WiFi.h>
#elif defined(ESP32)
  #include <WiFi.h>
  #include <WiFiClientSecure.h>
  #define SSL_AXTLS
#elif defined(ESP31B)
  #include <ESP31BWiFi.h>
#else
  #error "network type ESP8266 ASYNC only possible on the ESP mcu!"
#endif

#include <ESPAsyncTCP.h>
#include <ESPAsyncTCPbuffer.h>

/home/kh/Arduino/libraries/ESP3D-3.0.0-alpha3/esp3d/src/modules/http/handles/handle-description_xml.cpp: In static member function 'static void HTTP_Server::handle_SSDP()':
/home/kh/Arduino/libraries/ESP3D-3.0.0-alpha3/esp3d/src/modules/http/handles/handle-description_xml.cpp:40:48: error: 'class SSDPClass' has no member named 'getSchema'; did you mean 'schema'?
         _webserver->send(200, "text/xml", SSDP.getSchema());
                                                ^~~~~~~~~
                                                schema

To fix you can use my forked ESP3D_Printer branch 3.0, which fixed those bugs.

Fix ESP32 compile errors

http module
websockets => using WebSockets_Generic library

0 replies

salrodri · 2022-10-24T23:34:38Z

salrodri
Oct 24, 2022
Author

I am using an esp32. So I just compile it and upload it and it seems to work. I will go ahead and turn off the wifi on my router and see if it works. [image: image.png]

…

On Mon, Oct 24, 2022 at 3:37 PM Khoi Hoang ***@***.***> wrote: To help you to work with ESP32 v2.0.5+ Compile for ESP8266 is OK. To use WT32_ETH01, you better use with ESP32 core 2.0.0+, such as current core v2.0.5 But for ESP32, using latest core v2.0.5 + *ESP3D v3.0.0-alpha3* <https://github.com/luc-github/ESP3D/releases/tag/v3.0.0-alpha3>, there are many compile errors 1. Bug in *arduinoWebSockets* <https://github.com/Links2004/arduinoWebSockets> using even ESPAsyncTCP library for ESP32 https://github.com/Links2004/arduinoWebSockets/blob/323592f622e0ec8f9ce1f995c5777d9bbaaae1ec/src/WebSockets.h#L134-L147 #if defined(ESP8266) #include <ESP8266WiFi.h> #elif defined(ESP32) #include <WiFi.h> #include <WiFiClientSecure.h> #define SSL_AXTLS #elif defined(ESP31B) #include <ESP31BWiFi.h> #else #error "network type ESP8266 ASYNC only possible on the ESP mcu!" #endif #include <ESPAsyncTCP.h> #include <ESPAsyncTCPbuffer.h> 1. /home/kh/Arduino/libraries/ESP3D-3.0.0-alpha3/esp3d/src/modules/http/handles/handle-description_xml.cpp: In static member function 'static void HTTP_Server::handle_SSDP()': /home/kh/Arduino/libraries/ESP3D-3.0.0-alpha3/esp3d/src/modules/http/handles/handle-description_xml.cpp:40:48: error: 'class SSDPClass' has no member named 'getSchema'; did you mean 'schema'? _webserver->send(200, "text/xml", SSDP.getSchema()); ^~~~~~~~~ schema ------------------------------ To fix you can use my forked *ESP3D_Printer branch 3.0* <https://github.com/khoih-prog/ESP3D_Printer/tree/3.0>, which fixed those bugs. — Reply to this email directly, view it on GitHub <#14 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ASSK2RHOITWKRPVF2NPICA3WE36SXANCNFSM6AAAAAARNDFMPY> . You are receiving this because you authored the thread.Message ID: <khoih-prog/WebServer_WT32_ETH01/repo-discussions/14/comments/3955022@ github.com>

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Double Check #14

{{title}}

Replies: 11 comments

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

Select a reply

Double Check #14

salrodri Oct 24, 2022

Replies: 11 comments

khoih-prog Oct 24, 2022 Maintainer

salrodri Oct 24, 2022 Author

khoih-prog Oct 24, 2022 Maintainer

salrodri Oct 24, 2022 Author

khoih-prog Oct 24, 2022 Maintainer

salrodri Oct 24, 2022 Author

salrodri Oct 24, 2022 Author

khoih-prog Oct 24, 2022 Maintainer

salrodri Oct 24, 2022 Author

khoih-prog Oct 24, 2022 Maintainer

To help you to work with ESP32 v2.0.5+

Fix ESP32 compile errors

salrodri Oct 24, 2022 Author

salrodri
Oct 24, 2022

khoih-prog
Oct 24, 2022
Maintainer

salrodri
Oct 24, 2022
Author

khoih-prog
Oct 24, 2022
Maintainer

salrodri
Oct 24, 2022
Author

khoih-prog
Oct 24, 2022
Maintainer

salrodri
Oct 24, 2022
Author

salrodri
Oct 24, 2022
Author

khoih-prog
Oct 24, 2022
Maintainer

salrodri
Oct 24, 2022
Author

khoih-prog
Oct 24, 2022
Maintainer

salrodri
Oct 24, 2022
Author