-
Notifications
You must be signed in to change notification settings - Fork 155
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Doesn't work without a computer #277
Comments
Just curious, is the computer the de-facto power supply? |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
So, I've assembled the scheme, loaded the sketch and everything works greatly but only via cable to computer. I use internal dac on nodemcu on esp-wroom-32. So, the idea that as soon I plug off the usb cable from computer - it immideatly stops playing. All the settings as wlan password and so on I've off course done.
Debugging information from port monitor in arduino ide is below
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:4532
load:0x40078000,len:10724
ho 0 tail 12 room 4
load:0x40080400,len:5600
entry 0x400806b4
E (589) psram: PSRAM ID read error: 0xffffffff
E (589) spiram: SPI RAM enabled but initialization failed. Bailing out.
E (590) spiram: SPI RAM not initialized
I (159) main: starting app_main()
I (159) main: RAM left: 200736, Internal 217080
E (159) main: Running partition type 0 subtype 16 (offset 0x00010000)
I (179) main: Partition init done...
D (249) GPIO: gpio_get_pinDeepSleep err 0x1102
Log level is now ESP_LOG_ERROR
E (1499) vs1053: NO VS1053 detected
WIFI TRYING TO CONNECT TO SSID 2
E (5369) event: invalid static ip
DNS: 192.168.0.1
IP: 192.168.0.106
READY. Type help for a list of commands
##CLI.ICY0#: at IP 192.168.0.106
autostart: playing:1, currentstation:0
##CLI.NAMESET#: 0 1
##CLI.URLSET#: http://prmstrm.1.fm
##CLI.PATHSET#: /ajazz
##CLI.PORTSET#: 8000
##CLI.OVOLSET#: 0
##CLI.VOL#: 254
##CLI.ICY0#: Adore Jazz
##CLI.ICY3#: http://www.1.fm
##CLI.ICY4#: Vocal Jazz
##CLI.ICY5#: 192
##CLI.ICY6#: Adore Jazz
##CLI.META#: Ranee Lee - Them There Eyes
##CLI.PLAYING#
The text was updated successfully, but these errors were encountered: