Cannot activate user defined doesn't work in red menu[REQUEST]

[rijkeeey]

Hello,i have mhi2q_us_aug22_p4246 and trying convert from us to eu
after convertation in mib
i go to the swdl and put check in the box user dfined swdl
after i press any button to out from green menu and go to the red menu ,put sdcard with MHI2Q_ER_AUG22_P5092_MU1329
but user defined still not active in red menu? whats wrong i do?

[pawelgaw9]

@rijkeeey did you solve this problem, have same :(

[rijkeeey]

@pawelgaw9 I updated it through the standard, but I need to check if Amp is disabled so that the sound settings are not thrown.

I was also told that I need to update the American firmware to the last one and then do the conversion and then the user mode will be available

[pawelgaw9]

@pawelgaw9 I updated it through the standard, but I need to check if Amp is disabled so that the sound settings are not thrown.

I was also told that I need to update the American firmware to the last one and then do the conversion and then the user mode will be available

update through standard and it works ok ?
did you got an error before click resume about downgrade error ?

someone told you, we can update american firmware after converted it by mibtoolbox to eu unit ?

[rijkeeey]

@pawelgaw9 I updated it through the standard, but I need to check if Amp is disabled so that the sound settings are not thrown.
I was also told that I need to update the American firmware to the last one and then do the conversion and then the user mode will be available

update through standard and it works ok ? did you got an error before click resume about downgrade error ?

someone told you, we can update american firmware after converted it by mibtoolbox to eu unit ?

Yep,it works ok, i install mibtoolbox ,convert to eu,after i can update in red menu by standart (yes i got errror about downgrade), after update install patch for eu firmware ,update maps, gracenot,radio

[pawelgaw9]

Ok thank you. I will do the same

[pawelgaw9]

@rijkeeey
Did you get this error after software installation?

[rijkeeey]

@rijkeeey Did you get this error after software installation?

Yep,just press cancel compare

[pawelgaw9]

@rijkeeey Did you get this error after software installation?

Yep,just press cancel compare

It Works thank you 😀
Do your unit remember radio stations after turn inhibitor off?
mine starting from 87.5mhz everytime

[rijkeeey]

@rijkeeey Did you get this error after software installation?

Yep,just press cancel compare

It Works thank you 😀 Do your unit remember radio stations after turn inhibitor off? mine starting from 87.5mhz everytime

I haven't checked it yet, since the car is still being repaired, it seems that it still needs to be transferred to European frequencies through long coding

[pawelgaw9]

@rijkeeey Did you get this error after software installation?

Yep,just press cancel compare

It Works thank you 😀 Do your unit remember radio stations after turn inhibitor off? mine starting from 87.5mhz everytime

I haven't checked it yet, since the car is still being repaired, it seems that it still needs to be transferred to European frequencies through long coding

it already has european frequencies :) but always at start its starting from 87.5 mhz :)
im looking for solution