Skip to content

Latest commit

 

History

History
executable file
·
290 lines (212 loc) · 11 KB

vlc-screenshot-capturing.md

File metadata and controls

executable file
·
290 lines (212 loc) · 11 KB
Raw

Capturing screenshots of browser-based demos using VLC

By cxw/Incline

Intro

Demozoo is looking for screenshots of browser-based demoscene releases! This includes demos that run in browser environments such as ShaderToy. You can capture your favorite moments in demos using the free VLC media player and recorder. I will walk you through the capture process and show you how to upload the resulting images to Demozoo.

All of the programs I use can run on Linux, Mac, or Windows, and probably other Unix-like OSes. I tested the steps for this article on Windows.

There are a lot of steps, but they all take longer to describe than to actually do! Remember: Demozoo supports high-res images and multiple screenshots, so you can go wild!

Initial setup

  1. Download and install a desktop version of VLC. It supports Windows, Mac, and Linux. (I used VLC version 3.0.8.)

  2. Open VLC.

  3. On the Tools menu, select Preferences.

  4. (see screenshot) (1) Click on Hotkeys, (2) type "snapshot" in the Search box, and make note of the "Global" hotkey for Take video snapshot. This is the key you will press while the demo is running to save a screenshot. In my case, it is Alt+F12.

  5. Install at least two browsers. Some demos only run on Chrome or only on Firefox, so have several available.

  6. Install GIMP. You will use it to bulk-crop the images in the "Post-processing" section, below. If you already have a program that will crop multiple image files, you can skip this step.

  7. Download the Export Layers GIMP plugin by khalim19 from here.

  8. Install the Export Layers GIMP plugin usingper the instructions here.

  9. (Optional; recommended) Install my layernav plugin as described in "layernav.py", below.

Setting up to VLC capture a demo

  1. Open VLC.

  2. On the Media menu, select Open Capture Device....

  3. (see screenshot) (1) Select the Capture Device tab. (2) Change the Capture mode to Desktop (i.e., your screen). (3) Pick a frame rate for the capture. Lower rates will make the demo perform better, but will make the screenshots lag the hotkey press. Start with 5 f/s (frames per second) and see if that works for you. (4) Click the downward-pointing arrow next to the Play button. (5) Choose Enqueue from the drop-down menu.

  4. You will see a screen:// entry in your playlist. When you are ready to go, you will double-click that entry to start capturing.

Setting up the demo

Get the demo running on your PC! This will vary by demo.

  • Conduit by Gargaj may help you with this.
  • You can also check the README or FILE_ID.DIZ included with a demo to see what it runs on. For example, Voltra's FILE_ID.DIZ suggests Chromium and Edge.

Note: if you only have one monitor, make sure you can run the demo in windowed mode, not full-screen. That will make it much easier to interact with VLC while the demo is running.

You may need to change your browser settings to permit Web pages to auto-play sound in order for the demo to start.

Once you are able to run the demo in one window, with VLC open in another window, you are ready to take screenshots.

Capturing!

  1. Back in VLC, double-click the screen:// entry. You will see your desktop appear in VLC:

  2. Minimize VLC so you don't get an infinite tunnel :) .

  3. Start the demo.

  4. At — or just before — a part you want to take a screenshot of, hit the hotkey you noted above (Alt+F12 for me).

    • You will only get feedback in the VLC window, so you won't know that the capture has succeeded if VLC is minimized. Don't worry: the image will still have been captured.

  5. Hit the hotkey multiple times for as many screenshots as you want to take!

  6. When the demo is over, go back to VLC. Wait a few seconds to make sure it's finished processing screenshots, then hit the square Stop button at the bottom of the VLC window.

    • You will know it's still processing if you see screenshot frames appearing in the upper-left corner of the image, or if you see text overlays like "vlcsnap.png".

Post-processing

If you have a multi-monitor system or ran the demo windowed, you will need to trim the screenshots to show just the demo content. If you were able to run the demo in full-screen mode on a single monitor, you may be able to skip this section.

  1. Open GIMP.

  2. On the File menu, select Open as layers....

  3. Navigate to the Pictures folder, or wherever VLC saves screenshots on your platform.

  4. (see screenshot) Click the first vlcsnap file, scroll to the end, and shift-click the last vlcsnap file:

    From this point, anytime you save a GIMP (.xcf) file, it will save all of your screenshots in that one file.

  5. On the Layers menu, select Stack, then select Reverse Layer Order from the pop-out menu. This will put the first screenshot first rather than last.

  6. (see screenshot) (1) Click on the Layers tab to make the Layers pane visible. (If you can't see the Layers tab, go to the Windows menu, select Dockable Dialogs, then select Layers in the pop-out menu.) You will see all your vlcsnap files listed. (2) If any vlcsnaps aren't screenshots of the demo, or if you don't want to upload them, (2) click on them in the Layers box and (3) click the "X" to delete them.

    To see only one layer, (4) click on the eye icons on all the other layers to turn them off, so that only the layer you want to see has an eye icon visible. For an easier way to navigate the layers, see "layernav.py", below.

  7. (see screenshot) (1) Click on the rectangle-select tool in the toolbox. (2) Draw a selection rectangle around the area of the demo.

    I recommend zooming in on the top-left corner, starting the selection, zooming out, moving the bottom-right corner of the selection close to where you want it, then zooming in to finish the bottom-right corner. You can zoom with Ctrl+mouse wheel (on Windows).

    In GIMP, you can use Undo if you change the selection in a way you don't want.

  8. On the Image menu, select Crop to selection. That will crop all the screenshots (all the layers) at once.

  9. On the File menu, select Export Layers....

  10. (see screenshot) (1) Click Create Folder. (2) Give the folder a name. I used the name of the demo (Vorteilspack). Hit Enter to create the folder. Double-click on the folder to open it. (3) Click Export.

  11. You will see an Export Image as PNG dialog. Hit Export in that dialog. You will see the progress bar at the bottom of the VLC window repeatedly fill while the images are exported.

Uploading images to Demozoo

Finally!

  1. In the browser, go to the page for the production you have screenshots for.

  2. If there are no screenshots, click Add one:

    Otherwise, click Add screenshot below the existing screenshots:

  3. (see screenshot) (1) Click Choose Files and select your images. Alternatively, drag and drop your images onto the Choose Files button. Note: the total file size should be under 10 megabytes. (2) You will see the number of files to be uploaded. Make sure it matches what you expect. (3) Click Submit.

  4. Wait for the upload!

    If you get a 413 error, try again with fewer files at once. I think the limit is 10M, but am not sure (question pending answer).

  5. Bask in the glory of the page with screenshots, and in the glow of the knowledge that you have helped the scene!

Addendum: layernav.py

I wrote a GIMP plugin to make it easier to navigate between layers. To use it:

Installation (one-time)

  1. Download layernav.py

  2. Copy layernav.py to your GIMP plugins directory. For GIMP 2.8, that is probably .gimp-2.8 in your home directory. For GIMP 2.10, it is probably :

    • Linux or other Unix-like: ~/.config/GIMP/2.10/plug-ins
    • Windows: %APPDATA%\GIMP\2.10\plug-ins
    • Mac: ~/Library/Application Support/GIMP/2.10/plug-ins

    This MakeUseOf article (by Andy Betts) may help you.

  3. Restart GIMP.

  4. On the Edit menu, select Keyboard Shortcuts.

  5. (see screenshot) (1) in the Search box, type "layernav". (2) Next to Show next layer, click on the word Disabled. Press a hotkey — I use Ctrl+Shift+Page Down. (3) Do the same for Show previous layer. I use Ctrl+Shift+Page Up. (4) Press Close.

Usage

When you have an image open, press the hotkeys you chose to navigate between layers. If no layer is visible, the plugin will take you to the first layer.

Legal

This article is copyright (c) 2019 cxw. Please feel free to use and share it under the terms of the CC-BY-NC 4.0 International license. For the avoidance of doubt, merely using or sharing this document on a work computer does not inherently count as commercial use. But if your day job actually involves scening, please let me know so I can apply :) .

Thanks to

I am not affiliated with any of those parties.

  • menace for the opportunity to write this article!