Skip to content

Latest commit

 

History

History
163 lines (129 loc) · 7.2 KB

README-k3s.md

File metadata and controls

163 lines (129 loc) · 7.2 KB
Raw

kubernetes-lxd

A step-by-step guide to get rancher/k3s running inside an LXC container.

This guide is an alternative to minikube which also offers a local kubernetes environment. The advantage of the LXC approach is that everything runs natively on the host kernel without any virtualization costs from a Virtual Machine. For example, minikube causes such high CPU usage on the host (see minikube issue #3207), that development is impaired. The downside is more setup work to get the kubernetes environment running, its administration costs, and lower isolation of the kubernetes cluster.

Below, you find a step-by-step guide to setup an LXC container and install rancher/k3s on it.

Lxc installation

Lxc is similar to docker but aims more to be an OS container instead of just application containers. To use it, install lxd and initialize it using lxd init. When prompted, answer the following questions:

  • Would you like to use LXD clustering? (yes/no) [default=no]:
  • Do you want to configure a new storage pool? (yes/no) [default=yes]: yes -> dir (any directory based provider should work)
  • Would you like to connect to a MAAS server? (yes/no) [default=no]:
  • Would you like to create a new local network bridge? (yes/no) [default=yes]:
  • What should the new bridge be called? [default=lxdbr0]:
  • What IPv4 address should be used? (CIDR subnet notation, “auto” or “none”) [default=auto]:
  • What IPv6 address should be used? (CIDR subnet notation, “auto” or “none”) [default=auto]:
  • Would you like LXD to be available over the network? (yes/no) [default=no]: no
  • Would you like stale cached images to be updated automatically? (yes/no) [default=yes]
  • Would you like a YAML "lxd init" preseed to be printed? (yes/no) [default=no]:

Starting your LXC container

  1. Before you can fire up your lxc container, you have to make sure to create /etc/subuid and /etc/subgid with the following entries:

    root:1000000:1000000000
<youruserid>:1000000:1000000000

    Run systemctl restart lxd to have LXD detect your new maps.

  2. As the base system for our kubernetes we will use Debian and call the lxc machine k3s-lxc. Now create your kubernetes host machine with

    lxc launch images:debian/10 k3s-lxc

    Run lxc list to ensure that your machine k3s-lxc is up and running.

    Note: To get an overview over the supported base images, run

    lxc image list images:

  3. Usual lxc containers are quite restricted in their capabilities. Because k3s needs to set up nested containers, it is required to give the lxc container the capabilities to manage networking configuration and create cgroups. For that, run lxc config edit k3s-lxc and merge in the following settings:

    config:
  linux.kernel_modules: ip_tables,ip6_tables,netlink_diag,nf_nat,overlay
  raw.lxc: lxc.mount.auto=proc:rw sys:rw
  security.privileged: "true"
  security.nesting: "true"
    • kernel_modules: depending on the kernel of your host system, you need to add further kernel modules here. The ones listed above are for networking and for dockers overlay filesystem.
    • raw.lxc: this configures lxc to make container configuration inside the lxc container possible.
    • security.privileged and security.nesting: for a privileged container which may create nested cgroups

Installing rancher/k3s in the lxc container

Below, some commands will need to be executed inside the lxc container and others on the host.

  • $-prefix means to be executed on the host machine.
  • @-prefix means to be executed inside the lxc container. To enter the container as root, do $ lxc exec k3s-lxc /bin/bash.
  • no prefix means it does not matter where the command is executed.

  1. On your host, ensure that $ conntrack -L produces some output (this means it works). If this requires additional kernel modules to be loaded, add those to the lxc container config. For example you might need to add in $ lxc config edit k3s-lxc

    config:
  linux.kernel_modules: xt_conntrack,...

  2. Pull k3s on your host system, and push it into the container:

    $ curl -Lo k3s https://github.com/rancher/k3s/releases/download/v0.9.1/k3s
$ chmod +x k3s
$ lxc file push k3s k3s-lxc/usr/local/bin/k3s

  3. Install ca-certificates in k3s-lxc.

    @ apt-get install -y ca-certificates

    If you skip this, image pulling will not work due to certificate validation errors.

  4. Newer versions of k3s want to read from /dev/kmsg which is not present in the container. You need to instruct systemd to always create a symlink to /dev/console instead:

    @ echo 'L /dev/kmsg - - - - /dev/console' > /etc/tmpfiles.d/kmsg.conf

  5. Restart your lxc container with

    $ lxc restart k3s-lxc

    If this does not work, try the hard way

    $ lxc exec k3s-lxc reboot

  6. Now it is time to try out if k3s runs in your container:

    @ k3s server

    Congratulations, if the last command worked, you now have k3s/kubernetes running in your lxc container.

    If this isn't working, you need to trouble-shoot. Then stop k3s (Ctrl+C).

  7. Automatically start k3s when the container starts. Run

    @ systemctl edit --force --full k3s.service

    and paste the the content of the k3s unit file and remove the EnvironmentFile line. Finally, enable the unit with

    @ systemctl enable k3s
@ systemctl start k3s

Configure the host for working with k3s-lxc

  1. On your host machine, add a host entry to access your k3s-lxc container by DNS name. Find out the IP of your lxc container by running $ lxc list k3s-lxc. Add its IP in /etc/hosts

    <k3s-lxc-ip>   k3s-lxc

    After that, it should be possible to ping the container with ping k3s-lxc.

  2. Set up a kubectl context on your host system to talk to your k3s installation in the lxc container:

    $ lxc file pull k3s-lxc/etc/rancher/k3s/k3s.yaml .
$ sed -i 's:127.0.0.1:k3s-lxc:;s:default:k3s-lxc:g' k3s.yaml
$ KUBECONFIG=~/.kube/config:k3s.yaml kubectl config view --raw > config.tmp
$ mv config.tmp ~/.kube/config
$ kubectl config use-context k3s-lxc

    The third line does some magic to merge the rancher config into your existing KUBECONFIG file.

  3. (Optional) Check if everything is running correctly by deploying a small test application

    kubectl apply -f src/test-k3s-lxc.yaml

    You should be able to access the application from your browser http://k3s-lxc.

    If that does not work, try to access the test service from within your kubernetes network.

    $ kubectl run --generator=run-pod/v1 -ti --image nicolaka/netshoot curl
> curl test # should fetch a minimal greeting
Ctrl-D
$ kubectl delete pod curl

Useful command for working with your LXC container

  • Start your lxc container with lxc start k3s-lxc
  • Show your running container with its IP lxc list
  • Open a privileged shell in your container with lxc exec k3s-lxc /bin/bash