You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have RPi3 with OMV. I'm using Portainer for installing.
I currently have separately installed NordVPN directly on RPi. I'm using SABnzbd. So currently I'm manually starting NordVPN and connecting to the required server. I'm getting up to 4MB/s speed when downloading.
Then recently I found this project. I used below to create stack:
version: "2.1"
services:
vpn:
image: ghcr.io/bubuntux/nordvpn
container_name: NordVpn
cap_add:
- NET_ADMIN # Required
environment: # Review https://github.com/bubuntux/nordvpn#environment-variables
- USER=xxx # Required
- "PASS=xxxx" # Required
- CONNECT=Netherlands
- TECHNOLOGY=NordLynx
- NETWORK=192.168.0.0/24 # So it can be accessed within the local network
- TZ=Europe/London
- DNS=Disable
ports:
- 8080:8080
sysctls:
- net.ipv6.conf.all.disable_ipv6=1 # Recomended if using ipv4 only
All seems to be working correctly but how I can be sure that SABnzbd is definitely connecting through VPN? Now I'm getting speeds up to 7MB/s. I would expect speeds the same or similar when using original option. I never had more than 4MB/s with VPN on. Without VPN I had up to 10MB/s so I'm worried that SABnzbd traffic is not going through VPN.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hello everyone,
I have RPi3 with OMV. I'm using Portainer for installing.
I currently have separately installed NordVPN directly on RPi. I'm using SABnzbd. So currently I'm manually starting NordVPN and connecting to the required server. I'm getting up to 4MB/s speed when downloading.
Then recently I found this project. I used below to create stack:
version: "2.1"
services:
vpn:
image: ghcr.io/bubuntux/nordvpn
container_name: NordVpn
cap_add:
- NET_ADMIN # Required
environment: # Review https://github.com/bubuntux/nordvpn#environment-variables
- USER=xxx # Required
- "PASS=xxxx" # Required
- CONNECT=Netherlands
- TECHNOLOGY=NordLynx
- NETWORK=192.168.0.0/24 # So it can be accessed within the local network
- TZ=Europe/London
- DNS=Disable
ports:
- 8080:8080
sysctls:
- net.ipv6.conf.all.disable_ipv6=1 # Recomended if using ipv4 only
sabnzbd:
image: lscr.io/linuxserver/sabnzbd
container_name: SABnzbd
environment:
- PUID=1000
- PGID=1000
- TZ=Europe/London
volumes:
- /srv/dev-disk-by-label-Disk2/Download/Usenet:/config
- /srv/dev-disk-by-label-Disk2/Download/Usenet/downloads/complete:/downloads
- /srv/dev-disk-by-label-Disk2/Download/Usenet/downloads/incomplete:/incomplete-downloads
restart: unless-stopped
network_mode: service:vpn
All seems to be working correctly but how I can be sure that SABnzbd is definitely connecting through VPN? Now I'm getting speeds up to 7MB/s. I would expect speeds the same or similar when using original option. I never had more than 4MB/s with VPN on. Without VPN I had up to 10MB/s so I'm worried that SABnzbd traffic is not going through VPN.
Any suggestions how this can be checked?
Thanks
Beta Was this translation helpful? Give feedback.
All reactions