Timer not executing #20338
eightbit88
started this conversation in
General
Timer not executing
#20338
Replies: 1 comment 1 reply
-
If this is an exact copy of your rule, you have a syntax error at the comma after the trigger |
Beta Was this translation helpful? Give feedback.
1 reply
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Hi all, I have a timer I try to execute once ever day with the rule, but running into some trouble.
Rule1 ON Rules#Timer=2, Do Webquery http://my_IP/externaltest POST {"from tasmota sensor"} Program finished ENDON
I can successfully execute the rule whenever I don't use the #Timer=x, I set the timer from the web interface and when I check the timer in the console, it is correctly set. All fields within the HTML timer interface are set to on e.g. Enable, enable all days...., when I issue the time command on the console it shows the correct local time.
When I use
Rule1 ON Time#Minute=15, Do Webquery http://my_IP/externaltest POST {"from tasmota sensor"} Program finished endon it also executes correctly.
The local time was set with Sydney Australia command in the console with Backlog0 Timezone 99; TimeStd 1,1,4,1,3,600; TimeDst 1,1,10,1,2,660
I also tried Timezone +10:00. I noticed that when it is trying to execute the Rule it seams to hang for a short time, but I'm not a 100% about that. At the moment I try to use a workaround with.
Rule1 On Time#Minute|1440, Do Webquery http://my_IP/externaltest POST {"from tasmota sensor"} Program finished endon
Any help would be greatly appreciated
Beta Was this translation helpful? Give feedback.
All reactions