Skip to content

Latest commit

 

History

History
187 lines (126 loc) · 5.85 KB

README.md

File metadata and controls

187 lines (126 loc) · 5.85 KB

youtube-webos-cobalt

YouTube App built with Cobalt with extended functionalities.

This project is built on top of youtube-webos.

Cobalt only support a subset of HTML tags, youtube-webos had to be reworked to only use div tag.

Configuration Screen Segment Skipped Spped Configuration

Features

Same as the default youtube application:

  • Speed management

Same as youtube-webos:

Note: Configuration screen can be opened by pressing 🟩 GREEN button on the remote.

Pre-requisites

  • Official YouTube app needs to be uninstalled before installation.

Installation

  • Use webOS Homebrew Channel - app is published in official webosbrew repo
  • Use Device Manager app - see Releases for a prebuilt .ipk binary file
  • Use official webOS/webOS OSE SDK: ares-install youtube...ipk (for webOS SDK configuration see below)

Configuration

Configuration screen can be opened by pressing 🟩 GREEN button on the remote.

Autostart

In order to autostart an application the following command needs to be executed via SSH or Telnet:

luna-send-pub -n 1 'luna://com.webos.service.eim/addDevice' '{"appId":"youtube.leanback.v4","pigImage":"","mvpdIcon":""}'

This will make "YouTube AdFree" display as an eligible input application (next to HDMI/Live TV, etc...), and, if it was the last selected input, it will be automatically launched when turning on the TV.

This will also greatly increase startup performance, since it will be runnning constantly in the background, at the cost of increased idle memory usage. (so far, relatively unnoticable in normal usage)

In order to disable autostart run this:

luna-send -n 1 'luna://com.webos.service.eim/deleteDevice' '{"appId":"youtube.leanback.v4"}'

Patching your IPK

  • Install docker:

Follow instructions on https://docs.docker.com/engine/install/

Make sure to install all docker components like docker-buildx-plugin and docker-compose-plugin.

  • Install tools
sudo apt install jq git patch sed binutils squashfs-tools rename findutils xz-utils
  • Clone the repository
git clone https://github.com/GuillaumeSmaha/youtube-webos-cobalt.git
  • Enter the folder and you can patch your YouTube ipk
cd youtube-webos-cobalt

make PACKAGE=./your-tv-youtube.ipk

Customize package name: PACKAGE_NAME can be defined to change the package name

make PACKAGE=./your-tv-youtube.ipk PACKAGE_NAME=youtube-free.leanback.v4

Build Cobalt

If you don't trusted, pre-compiled version stored in cobalt-bin, you can build them yourself.

The building process is:

  • Clone cobalt repository
  • Apply the patch defined in cobalt-patches directory to inject AdBlock javascript after the document is loaded.
  • Build libcobalt.so using docker-compose method.

This process is handled by the following commands:

  • Clone the repo, enter the folder and call the build command, this will generate libcobalt.so file for the given versions. make cobalt-bin/<COBALT_VERSION>-<SB_API_VERSION>/libcobalt.so cobalt-bin/<COBALT_VERSION>-<SB_API_VERSION>.xz

For example: for Cobalt 23.lts.4 and SB Api version 12:

git clone https://github.com/FriedChickenButt/youtube-webos.git

cd youtube-webos-cobalt

make cobalt-bin/23.lts.4-12/libcobalt.so cobalt-bin/23.lts.4-12.xz

Building issue

If you already built the package, update the repo and got an error like node-gyp not found:

Try to clean docker image used to build.

docker image rm cobalt-build-evergreen cobalt-build-linux cobalt-build-base cobalt-base

Try to clean old Cobalt builds:

rm -fr cobalt/out/
make cobalt-clean

Development TV setup

Configuring @webosose/ares-cli with Developer Mode App

This is partially based on: https://webostv.developer.lge.com/develop/app-test/using-devmode-app/

  • Install Developer Mode app from Content Store
  • Enable developer mode, enable keyserver
  • Download TV's private key: http://TV_IP:9991/webos_rsa
  • Configure the device using ares-setup-device (-a may need to be replaced with -m if device named webos is already configured)
    • PASSPHRASE is the 6-character passphrase printed on screen in developer mode app
ares-setup-device -a webos -i "username=prisoner" -i "privatekey=/path/to/downloaded/webos_rsa" -i "passphrase=PASSPHRASE" -i "host=TV_IP" -i "port=9922"

Configuring @webosose/ares-cli with Homebrew Channel / root

  • Enable sshd in Homebrew Channel app
  • Generate ssh key on developer machine (ssh-keygen)
  • Copy the public key (id_rsa.pub) to /home/root/.ssh/authorized_keys on TV
  • Configure the device using ares-setup-device (-a may need to be replaced with -m if device named webos is already configured)
ares-setup-device -a webos -i "username=root" -i "privatekey=/path/to/id_rsa" -i "passphrase=SSH_KEY_PASSPHRASE" -i "host=TV_IP" -i "port=22"

Note: @webosose/ares-cli doesn't need to be installed globally - you can use a package installed locally after cd youtube-webos && npm install in this repo by just prefixing above commands with local path, like so: node_modules/.bin/ares-setup-device ...

Installation

cd youtube-webos
npm run deploy

Launching

  • The app will be available in the TV's app list or launch it using ares-cli.
cd youtube-webos
npm run launch

To jump immediately into some specific video use:

cd youtube-webos
npm run launch -- -p '{"contentTarget":"v=F8PGWLvn1mQ"}'