Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

I2C SSD1106 Display is not working (the oled is working) #1676

Open
Doridori9992 opened this issue Oct 29, 2023 · 4 comments
Open

I2C SSD1106 Display is not working (the oled is working) #1676

Doridori9992 opened this issue Oct 29, 2023 · 4 comments
Labels
help wanted Requesting support

Comments

@Doridori9992
Copy link

Doridori9992 commented Oct 29, 2023 •
edited

Hello, I bought I2C SSD1106 which is working with other codes but when I upload that code with configuring A_config the display behaves dumb and It refreshes every 10 seconds.

here are my circuits:
https://ibb.co/WVrjHGT
https://ibb.co/yBSwZZL
https://ibb.co/NxKY009

here is my config file:
`/* This software is licensed under the MIT License: https://github.com/spacehuhntech/esp8266_deauther */

#pragma once

#define ENABLE_DEBUG
#define DEBUG_PORT Serial
#define DEBUG_BAUD 115200

#define DEFAULT_ESP8266

// #define NODEMCU
// #define WEMOS_D1_MINI
// #define HACKHELD_VEGA
// #define DISPLAY_EXAMPLE_I2C
// #define DISPLAY_EXAMPLE_SPI

// #define MALTRONICS
// #define DSTIKE_DEAUTHER_V1
// #define DSTIKE_DEAUTHER_V2
// #define DSTIKE_DEAUTHER_V3
// #define DSTIKE_DEAUTHER_V3_5
// #define DSTIKE_D_DUINO_B_V5_LED_RING
// #define DSTIKE_DEAUTHER_BOY
// #define DSTIKE_NODEMCU_07
// #define DSTIKE_NODEMCU_07_V2
// #define DSTIKE_DEAUTHER_OLED
// #define DSTIKE_DEAUTHER_OLED_V1_5_S
// #define DSTIKE_DEAUTHER_OLED_V1_5
// #define DSTIKE_DEAUTHER_OLED_V2
// #define DSTIKE_DEAUTHER_OLED_V2_5
// #define DSTIKE_DEAUTHER_OLED_V3
// #define DSTIKE_DEAUTHER_OLED_V3_5
// #define DSTIKE_DEAUTHER_OLED_V4
// #define DSTIKE_DEAUTHER_OLED_V5
// #define DSTIKE_DEAUTHER_OLED_V6
// #define DSTIKE_DEAUTHER_MOSTER
// #define DSTIKE_DEAUTHER_MOSTER_V2
// #define DSTIKE_DEAUTHER_MOSTER_V3
// #define DSTIKE_DEAUTHER_MOSTER_V4
// #define DSTIKE_DEAUTHER_MOSTER_V5
// #define DSTIKE_USB_DEAUTHER
// #define DSTIKE_USB_DEAUTHER_V2
// #define DSTIKE_DEAUTHER_WATCH
// #define DSTIKE_DEAUTHER_WATCH_V2
// #define DSTIKE_DEAUTHER_MINI
// #define DSTIKE_DEAUTHER_MINI_EVO

// #define LYASI_7W_E27_LAMP
// #define AVATAR_5W_E14_LAMP

// Forces formatting of SPIFFS and EEPROM ot startup
// #define FORMAT_SPIFFS
// #define FORMAT_EEPROM

// Forces a reset of all settings at startup
// #define RESET_SETTINGS

// ========== CONFIGS ========== //

// https://github.com/spacehuhntech/hackheld
#if defined(HACKHELD_VEGA)
// ===== LED ===== //
#define USE_LED false
#define LED_NEOPIXEL

#define LED_NEOPIXEL_GRB
// #define LED_NEOPIXEL_RGB

#define LED_MODE_BRIGHTNESS 10

#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15 // D8

// ===== DISPLAY ===== //
#define USE_DISPLAY true
#define FLIP_DIPLAY true

#define SH1106_I2C

#define I2C_ADDR 0x3C
#define I2C_SDA 4 // D2
#define I2C_SCL 5 // D1

// ===== BUTTONS ===== //
#define BUTTON_UP 14 // D5
#define BUTTON_DOWN 12 // D6
#define BUTTON_A 2 // D4
#define BUTTON_B 0 // D3

// https://github.com/SpacehuhnTech/esp8266_deauther/wiki/Setup-Display-&-Buttons#example-setup-with-i2c-oled
#elif defined(DISPLAY_EXAMPLE_I2C)

// ===== DISPLAY ===== //
#define SSD1106_I2C
// #define SSD1306_I2C

#define I2C_ADDR 0x3C
#define I2C_SDA 5
#define I2C_SCL 4
#define USE_LED false
// #define FLIP_DIPLAY true

// ===== BUTTONS ===== //
#define BUTTON_UP 14
#define BUTTON_DOWN 12
#define BUTTON_A 13

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
// #define LED_NEOPIXEL_RGB

#define LED_NUM 1
#define LED_NEOPIXEL_PIN 9
#define LED_MODE_BRIGHTNESS 10

// https://github.com/SpacehuhnTech/esp8266_deauther/wiki/Setup-Display-&-Buttons#example-setup-with-spi-oled
#elif defined(DISPLAY_EXAMPLE_SPI)

#define SH1106_SPI
// #define SSD1306_SPI

#define SPI_RES 5
#define SPI_DC 4
#define SPI_CS 15

// #define FLIP_DIPLAY true

// ===== BUTTONS ===== //
#define BUTTON_UP 0
#define BUTTON_DOWN 12
#define BUTTON_A 2

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
// #define LED_NEOPIXEL_RGB

#define LED_NUM 1
#define LED_NEOPIXEL_PIN 9
#define LED_MODE_BRIGHTNESS 10

#elif defined(MALTRONICS)

// ===== Reset ====== //
#define RESET_BUTTON 5

// ===== LED ===== //
#define LED_DOTSTAR
#define LED_NUM 1
#define LED_DOTSTAR_CLK 12
#define LED_DOTSTAR_DATA 13
#define LED_MODE_BRIGHTNESS 255

// ===== Web ===== //
#define WEB_IP_ADDR (192, 168, 4, 2)
#define WEB_URL "deauther.tools"

#elif defined(DSTIKE_D_DUINO_B_V5_LED_RING)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 12
#define LED_NEOPIXEL_PIN 15

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_DEAUTHER_BOY)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 10
#define BUTTON_DOWN 9
#define BUTTON_A 14
#define BUTTON_B 12

#elif defined(DSTIKE_DEAUTHER_V3_5) || defined(DSTIKE_NODEMCU_07_V2)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

#elif defined(DSTIKE_DEAUTHER_OLED_V1_5_S)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_DEAUTHER_OLED) || defined(DSTIKE_DEAUTHER_OLED_V1_5)

// ===== LED ===== //
#define LED_DIGITAL

#define LED_PIN_R 16
#define LED_PIN_B 2

// ===== DISPLAY ===== //
#define SSD1306_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_DEAUTHER_OLED_V2) || defined(DSTIKE_DEAUTHER_OLED_V2_5) || defined(DSTIKE_DEAUTHER_OLED_V3)

// ===== LED ===== //
#define LED_DIGITAL

#define LED_PIN_R 16
#define LED_PIN_B 2

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_DEAUTHER_OLED_V3_5) || defined(DSTIKE_DEAUTHER_OLED_V4) || defined(DSTIKE_DEAUTHER_OLED_V5) || defined(DSTIKE_DEAUTHER_MOSTER) || defined(DSTIKE_DEAUTHER_MOSTER_V2) || defined(DSTIKE_DEAUTHER_MOSTER_V3) || defined(DSTIKE_DEAUTHER_MOSTER_V4)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_DEAUTHER_OLED_V6) || defined(DSTIKE_DEAUTHER_MOSTER_V5)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

#define HIGHLIGHT_LED 16

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

#define RTC_DS3231

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_USB_DEAUTHER_V2)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 4

#elif defined(DSTIKE_DEAUTHER_WATCH) || defined(DSTIKE_DEAUTHER_MINI)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

#define HIGHLIGHT_LED 16

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(DSTIKE_DEAUTHER_WATCH_V2) || defined(DSTIKE_DEAUTHER_MINI_EVO)

// ===== LED ===== //
#define LED_NEOPIXEL_GRB
#define LED_NUM 1
#define LED_NEOPIXEL_PIN 15

#define HIGHLIGHT_LED 16

// ===== DISPLAY ===== //
#define SH1106_I2C
#define FLIP_DIPLAY true
#define DISPLAY_TEXT "Hardware by DSTIKE"

#define RTC_DS3231

// ===== BUTTONS ===== //
#define BUTTON_UP 12
#define BUTTON_DOWN 13
#define BUTTON_A 14

#elif defined(LYASI_7W_E27_LAMP)

// ===== LED ===== //
#define LED_MY92

#define LED_MODE_OFF 0, 0, 0
#define LED_MODE_SCAN 0, 0, 255
#define LED_MODE_ATTACK 255, 0, 0
#define LED_MODE_IDLE 0, 255, 0
#define LED_MODE_BRIGHTNESS 10

#define LED_NUM 1
#define LED_MY92_DATA 4
#define LED_MY92_CLK 5
#define LED_MY92_CH_R 0
#define LED_MY92_CH_G 1
#define LED_MY92_CH_B 2
#define LED_MY92_CH_BRIGHTNESS 3
#define LED_MY92_MODEL MY92XX_MODEL_MY9291

#elif defined(AVATAR_5W_E14_LAMP)

// ===== LED ===== //
#define LED_MY92

#define LED_MODE_OFF 0, 0, 0
#define LED_MODE_SCAN 0, 0, 255
#define LED_MODE_ATTACK 255, 0, 0
#define LED_MODE_IDLE 0, 255, 0
#define LED_MODE_BRIGHTNESS 10

#define LED_NUM 1
#define LED_MY92_DATA 13
#define LED_MY92_CLK 15
#define LED_MY92_CH_R 0
#define LED_MY92_CH_G 1
#define LED_MY92_CH_B 2
#define LED_MY92_CH_BRIGHTNESS 3
#define LED_MY92_MODEL MY92XX_MODEL_MY9291

#elif defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER) || defined(DSTIKE_NODEMCU_07) || defined(DSTIKE_DEAUTHER_V1) || defined(DSTIKE_DEAUTHER_V2) || defined(DSTIKE_DEAUTHER_V3)
// ===== LED ===== //
// #define LED_DIGITAL
// #define LED_PIN_R 16 // NodeMCU on-board LED
// #define LED_PIN_B 2 // ESP-12 LED
#define BUTTON_UP 14
#define BUTTON_DOWN 12
#define BUTTON_A 13

#endif /* if defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER) || defined(DSTIKE_NODEMCU_07) || defined(DSTIKE_DEAUTHER) || defined(DSTIKE_DEAUTHER_V1) || defined(DSTIKE_DEAUTHER_V2) || defined(DSTIKE_DEAUTHER_V3) */
// ============================== //

// ========= FALLBACK ========= //

// ===== AUTOSAVE ===== //
#ifndef AUTOSAVE_ENABLED
#define AUTOSAVE_ENABLED true
#endif /* ifndef ATTACK_ALL_CH */

#ifndef AUTOSAVE_TIME
#define AUTOSAVE_TIME 60
#endif /* ifndef ATTACK_ALL_CH */

// ===== ATTACK ===== //
#ifndef ATTACK_ALL_CH
#define ATTACK_ALL_CH false
#endif /* ifndef ATTACK_ALL_CH */

#ifndef RANDOM_TX
#define RANDOM_TX false
#endif /* ifndef RANDOM_TX */

#ifndef ATTACK_TIMEOUT
#define ATTACK_TIMEOUT 600
#endif /* ifndef ATTACK_TIMEOUT */

#ifndef DEAUTHS_PER_TARGET
#define DEAUTHS_PER_TARGET 25
#endif /* ifndef DEAUTHS_PER_TARGET */

#ifndef DEAUTH_REASON
#define DEAUTH_REASON 1
#endif /* ifndef DEAUTH_REASON */

#ifndef BEACON_INTERVAL_100MS
#define BEACON_INTERVAL_100MS true
#endif /* ifndef BEACON_INTERVAL_100MS */

#ifndef PROBE_FRAMES_PER_SSID
#define PROBE_FRAMES_PER_SSID 1
#endif /* ifndef PROBE_FRAMES_PER_SSID */

// ===== SNIFFER ===== //
#ifndef CH_TIME
#define CH_TIME 200
#endif /* ifndef CH_TIME */

#ifndef MIN_DEAUTH_FRAMES
#define MIN_DEAUTH_FRAMES 3
#endif /* ifndef MIN_DEAUTH_FRAMES */

// ===== ACCESS POINT ===== //
#ifndef AP_SSID
#define AP_SSID "pwned"
#endif /* ifndef AP_SSID */

#ifndef AP_PASSWD
#define AP_PASSWD "deauther"
#endif /* ifndef AP_PASSWD */

#ifndef AP_HIDDEN
#define AP_HIDDEN false
#endif /* ifndef AP_HIDDEN */

#ifndef AP_IP_ADDR
#define AP_IP_ADDR { 192, 168, 4, 1 }
#endif /* ifndef AP_IP_ADDR */

// ===== WEB INTERFACE ===== //
#ifndef WEB_ENABLED
#define WEB_ENABLED true
#endif /* ifndef WEB_ENABLED */

#ifndef WEB_CAPTIVE_PORTAL
#define WEB_CAPTIVE_PORTAL false
#endif /* ifndef WEB_CAPTIVE_PORTAL */

#ifndef WEB_USE_SPIFFS
#define WEB_USE_SPIFFS false
#endif /* ifndef WEB_USE_SPIFFS */

#ifndef DEFAULT_LANG
#define DEFAULT_LANG "en"
#endif /* ifndef DEFAULT_LANG */

// ===== CLI ===== //
#ifndef CLI_ENABLED
#define CLI_ENABLED true
#endif /* ifndef CLI_ENABLED */

#ifndef CLI_ECHO
#define CLI_ECHO true
#endif /* ifndef CLI_ECHO */

// =============== LED =============== //
#if defined(LED_NEOPIXEL_RGB) || defined(LED_NEOPIXEL_GRB)
#define LED_NEOPIXEL
#endif /* if defined(LED_NEOPIXEL_RGB) || defined(LED_NEOPIXEL_GRB) */

#if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(LED_MY92) && !defined(LED_DOTSTAR)
#define LED_DIGITAL
#define USE_LED false
#else // if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(LED_MY92) && !defined(LED_DOTSTAR)
#define USE_LED true
#endif // if !defined(LED_DIGITAL) && !defined(LED_RGB) && !defined(LED_NEOPIXEL) && !defined(LED_MY92) && !defined(LED_DOTSTAR)

#ifndef LED_PIN_R
#define LED_PIN_R 255
#endif /* ifndef LED_PIN_R */

#ifndef LED_PIN_G
#define LED_PIN_G 255
#endif /* ifndef LED_PIN_G */

#ifndef LED_PIN_B
#define LED_PIN_B 255
#endif /* ifndef LED_PIN_B */

#ifndef LED_ANODE
#define LED_ANODE false
#endif /* ifndef LED_ANODE */

#ifndef LED_MODE_OFF
#define LED_MODE_OFF 0, 0, 0
#endif /* ifndef LED_MODE_OFF */

#ifndef LED_MODE_SCAN
#define LED_MODE_SCAN 0, 0, 255
#endif /* ifndef LED_MODE_SCAN */

#ifndef LED_MODE_ATTACK
#define LED_MODE_ATTACK 255, 0, 0
#endif /* ifndef LED_MODE_ATTACK */

#ifndef LED_MODE_IDLE
#define LED_MODE_IDLE 0, 255, 0
#endif /* ifndef LED_MODE_IDLE */

#ifndef LED_MODE_BRIGHTNESS
#define LED_MODE_BRIGHTNESS 10
#endif /* ifndef LED_MODE_BRIGHTNESS */

// =============== DISPLAY =============== //

#ifndef DISPLAY_TIMEOUT
#define DISPLAY_TIMEOUT 600
#endif /* ifndef DISPLAY_TIMEOUT */

#ifndef DISPLAY_TEXT
#define DISPLAY_TEXT ""
#endif /* ifndef DISPLAY_TEXT */

#ifndef FLIP_DIPLAY
#define FLIP_DIPLAY false
#endif /* ifndef FLIP_DIPLAY */

#if !defined(SSD1306_I2C) && !defined(SSD1306_SPI) && !defined(SH1106_I2C) && !defined(SH1106_SPI)
#define SSD1306_I2C
#define USE_DISPLAY false
#else /* if !defined(SSD1306_I2C) && !defined(SSD1306_SPI) && !defined(SH1106_I2C) && !defined(SH1106_SPI) /
#define USE_DISPLAY true
#endif / if !defined(SSD1306_I2C) && !defined(SSD1306_SPI) && !defined(SH1106_I2C) && !defined(SH1106_SPI) */

#ifndef I2C_ADDR
#define I2C_ADDR 0x3C
#endif /* ifndef I2C_ADDR */

#ifndef I2C_SDA
#define I2C_SDA 5
#endif /* ifndef I2C_SDA */

#ifndef I2C_SCL
#define I2C_SCL 4
#endif /* ifndef I2C_SCL */

#ifndef SPI_RES
#define SPI_RES 5
#endif /* ifndef SPI_RES */

#ifndef SPI_DC
#define SPI_DC 4
#endif /* ifndef SPI_DC */

#ifndef SPI_CS
#define SPI_CS 15
#endif /* ifndef SPI_CS */

// =============== BUTTONS =============== //
#ifndef BUTTON_UP
#define BUTTON_UP 255
#endif // ifndef BUTTON_UP

#ifndef BUTTON_DOWN
#define BUTTON_DOWN 255
#endif // ifndef BUTTON_DOWN

#ifndef BUTTON_A
#define BUTTON_A 255
#endif // ifndef BUTTON_A

#ifndef BUTTON_B
#define BUTTON_B 255
#endif // ifndef BUTTON_B

// ===== Reset ====== //
#ifndef RESET_BUTTON
#if BUTTON_UP != 0 && BUTTON_DOWN != 0 && BUTTON_A != 0 && BUTTON_B != 0
#define RESET_BUTTON 0
#else // if BUTTON_UP != 0 && BUTTON_DOWN != 0 && BUTTON_A != 0 && BUTTON_B != 0
#define RESET_BUTTON 255
#endif // if BUTTON_UP != 0 && BUTTON_DOWN != 0 && BUTTON_A != 0 && BUTTON_B != 0
#endif // ifndef RESET_BUTTON

// ===== Web ===== //
#ifndef WEB_IP_ADDR
#define WEB_IP_ADDR (192, 168, 4, 1)
#endif // ifndef WEB_IP_ADDR

#ifndef WEB_URL
#define WEB_URL "deauth.me"
#endif // ifndef WEB_URL

// ======== CONSTANTS ========== //
// Do not change these values unless you know what you're doing!
#define DEAUTHER_VERSION "2.6.1"
#define DEAUTHER_VERSION_MAJOR 2
#define DEAUTHER_VERSION_MINOR 6
#define DEAUTHER_VERSION_REVISION 1

#define EEPROM_SIZE 4095
#define BOOT_COUNTER_ADDR 1
#define SETTINGS_ADDR 100

// ======== AVAILABLE SETTINGS ========== //

/*
// ===== ATTACK ===== //
#define ATTACK_ALL_CH false
#define RANDOM_TX false
#define ATTACK_TIMEOUT 600
#define DEAUTHS_PER_TARGET 25
#define DEAUTH_REASON 1
#define BEACON_INTERVAL_100MS true
#define PROBE_FRAMES_PER_SSID 1

// ====== SNIFFER ====== //
#define CH_TIME 200
#define MIN_DEAUTH_FRAMES 3

// ===== ACCESS POINT ===== //
#define AP_SSID "pwned"
#define AP_PASSWD "deauther"
#define AP_HIDDEN false
#define AP_IP_ADDR {192, 168, 4, 1}

// ===== WEB INTERFACE ===== //
#define WEB_ENABLED true
#define WEB_CAPTIVE_PORTAL false
#define WEB_USE_SPIFFS false
#define DEFAULT_LANG "en"

// ===== CLI ===== //
#define CLI_ENABLED true
#define CLI_ECHO true

// ===== LED ===== //
#define USE_LED true
#define LED_DIGITAL
#define LED_RGB
#define LED_NEOPIXEL
#define LED_MY92

#define LED_ANODE false

#define LED_PIN_R 16
#define LED_PIN_G 255
#define LED_PIN_B 2

#define LED_NEOPIXEL_RGB
#define LED_NEOPIXEL_GRB

#define LED_NUM 1
#define LED_NEOPIXEL_PIN 255

#define LED_MODE_OFF 0,0,0
#define LED_MODE_SCAN 0,0,255
#define LED_MODE_ATTACK 255,0,0
#define LED_MODE_IDLE 0,255,0
#define LED_MODE_BRIGHTNESS 10

#define LED_NUM 1
#define LED_MY92_DATA 4
#define LED_MY92_CLK 5
#define LED_MY92_CH_R 0
#define LED_MY92_CH_G 1
#define LED_MY92_CH_B 2
#define LED_MY92_CH_BRIGHTNESS 3
#define LED_MY92_MODEL MY92XX_MODEL_MY9291
#define LED_MY92_MODEL MY92XX_MODEL_MY9231

#define LED_DOTSTAR
#define LED_NUM 1
#define LED_DOTSTAR_CLK 12
#define LED_DOTSTAR_DATA 13

// ===== DISPLAY ===== //
#define USE_DISPLAY false
#define DISPLAY_TIMEOUT 600
#define FLIP_DIPLAY false

#define SSD1306_I2C
#define SSD1306_SPI
#define SH1106_I2C
#define SH1106_SPI

#define I2C_ADDR 0x3C
#define I2C_SDA 5
#define I2C_SCL 4

#define SPI_RES 5
#define SPI_DC 4
#define SPI_CS 15

// ===== BUTTONS ===== //
#define BUTTON_UP 255
#define BUTTON_DOWN 255
#define BUTTON_A 255
#define BUTTON_B 255

// ===== Reset ====== //
#define RESET_BUTTON 5

// ===== Web ===== //
#define WEB_IP_ADDR (192, 168, 4, 1)
#define WEB_URL "deauth.me"

*/

// ========== ERROR CHECKS ========== //
#if LED_MODE_BRIGHTNESS == 0
#error LED_MODE_BRIGHTNESS must not be zero!
#endif /* if LED_MODE_BRIGHTNESS == 0 */`
@Doridori9992 Doridori9992 added the help wanted Requesting support label Oct 29, 2023
@welcome
Copy link

welcome bot commented Oct 29, 2023

Congrats on opening your first issue on this repository! 🎉
This is a automated message to help you avoid common pitfalls when asking for help online.
👉 Be sure to:
* 🇬🇧 Communicate in English so everybody can understand you
* 📖 Have a look at the Wiki and README for information
* 🔍 Search for similar issues (open and closed)
* ✍️ Provide enough information to understand, recreate and help out with your problem
* ℹ️ Let us know if you find a solution and please share it with us
* 📕 Close the issue when your problem has been solved

@wryhode
Copy link

wryhode commented Oct 30, 2023

The way the display glitches, it may be due to interference in the I2C wires. Try moving wires that aren't for the display away from them. You could also try to separate the data (SDA) and clock (SCL) wires even more.

@AxelGeneta00
Copy link

same prob, the 0.96 works fine but the 1.3 have glitches, the oled is also fine

@AxelGeneta
Copy link

Screenshot_2023-11-15-10-50-06-781_com android chrome-edit
Replace this SD1306 bro with SH1106 I2c

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
help wanted Requesting support
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@Doridori9992 @wryhode @AxelGeneta @AxelGeneta00