NodeMCU ESP8266 Development Board with 0.96 Inch OLED - Screen not working?! #1661
-
|
Cheers, I've tried several bins and I can't get any of them to work with the OLED screen. Or, is there something I need to change in the settings? The brand is: ideashark
|
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
Make sure that you are using the supported OLED screen , and it is wired correctly. The only 2 supported screens are An SSD1306 or SH1106 OLED display with 128x64 pixels. Also amke sure you defined which screen you are using in the arduino code. |
Beta Was this translation helpful? Give feedback.
-
|
Good day. The same thing. The screen on the NodeMCU board with a soldered display does not work. Tried many firmwares and none of them work! Tried Arduino IDE programming. In section A_config.h you need to change the display settings and the wrong pins are specified there! |
Beta Was this translation helpful? Give feedback.
Make sure that you are using the supported OLED screen , and it is wired correctly. The only 2 supported screens are An SSD1306 or SH1106 OLED display with 128x64 pixels. Also amke sure you defined which screen you are using in the arduino code.