pressure10

\mainpage Main Page

---

Pressure 10 click

Pressure 10 Click features a digital interface barometric pressure sensor, based on piezoresistive bridge, labeled as HSPPAD042A, from ALPS Electric. It can use both SPI and I2C communication protocols, allowing it to be interfaced with a broad range of MCUs. Besides the pressure readings, this Click board™ also offers very accurate temperature reading, which is required for the pressure readings compensation and can be used in a wide range of battery-powered and portable applications thanks to its very low power consumption.

click Product page

---

Click library

• Author : MikroE Team
• Date : Jun 2020.
• Type : I2C/SPI type

Software Support

We provide a library for the Pressure10 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for Pressure10 Click driver.

Standard key functions :

• Config Object Initialization function.

void pressure10_cfg_setup ( pressure10_cfg_t *cfg );

• Initialization function.

PRESSURE10_RETVAL pressure10_init ( pressure10_t *ctx, pressure10_cfg_t *cfg );

• Click Default Configuration function.

void pressure10_default_cfg ( pressure10_t *ctx );

Example key functions :

• Send command.

void pressure10_send_cmd ( pressure10_t *ctx, uint8_t cmd );

• Check communication.

uint8_t pressure10_check_communication ( pressure10_t *ctx );

• Get status function.

void pressure10_get_status( pressure10_t *ctx, pressure10_status_t *status_obj );

Examples Description

Pressure 10 Click features a digital interface barometric pressure sensor, based on piezoresistive bridge. It can use both SPI and I2C communication protocols, allowing it to be interfaced with a broad range of MCUs.

The demo application is composed of two sections :

Application Init

Initializes the driver, checks the communication and configures the module for measurement.

void application_init ( void )
{
    log_cfg_t log_cfg;
    pressure10_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    pressure10_cfg_setup( &cfg );
    PRESSURE10_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    pressure10_init( &pressure10, &cfg );

    check_com = pressure10_check_communication( &pressure10 );
    if ( check_com == 0 )
    {
        log_printf( &logger, ">> Communication [OK]\r\n" );
    }
    else
    {
        log_printf( &logger, ">> Communication [ERROR]\r\n" );
        for( ; ; );
    }

    pressure10_default_cfg ( &pressure10 );
    log_printf( &logger, "----------------------------\r\n" );
}
  

Application Task

Reads the pressure and temperature data every 1500ms and displays the results on the USB UART.

void application_task ( void )
{
    float temperature;
    float pressure;

    pressure = pressure10_get_pressure( &pressure10 );
    temperature = pressure10_get_temperature( &pressure10 );

    log_printf( &logger, ">> Temperature: %.2f C\r\n", temperature );

    log_printf( &logger, "----------------------------\r\n" );

    log_printf( &logger, ">> Pressure: %.2f mBar\r\n", pressure );

    log_printf( &logger, "----------------------------\r\n" );

    Delay_ms ( 1000 );
    Delay_ms ( 500 );
}  

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.Pressure10

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---