no22

\mainpage Main Page

---

NO2 2 click

NO2 2 Click is a gas sensor Click board™, equipped with the MiCS-2714, a compact metal oxide (MOS) sensor. This sensor reacts to the presence of nitrogen dioxide (NO2) and hydrogen (H2).

click Product page

---

Click library

• Author : MikroE Team
• Date : dec 2019.
• Type : SPI type

Software Support

We provide a library for the NO22 Click as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.

Package can be downloaded/installed directly form compilers IDE(recommended way), or downloaded from our LibStock, or found on mikroE github account.

Library Description

This library contains API for NO22 Click driver.

Standard key functions :

• Config Object Initialization function.

void no22_cfg_setup ( no22_cfg_t *cfg );

• Initialization function.

NO22_RETVAL no22_init ( no22_t *ctx, no22_cfg_t *cfg );

• Click Default Configuration function.

void no22_default_cfg ( no22_t *ctx );

Example key functions :

• Function for reading ADC data

uint16_t no22_read_data ( no22_t *ctx );

• Function for reading ppb data

float no22_get_ppb ( no22_t *ctx );

• Function for setting pht pin

uint8_t no22_set_pht_state ( no22_t *ctx, uint8_t state );

Examples Description

Measure the level of NO2

The demo application is composed of two sections :

Application Init

Driver init

void application_init ( void )
{
    log_cfg_t log_cfg;
    no22_cfg_t cfg;
    uint8_t error_data;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    
    no22_cfg_setup( &cfg );
    NO22_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    no22_init( &no22, &cfg );

    error_data = no22_set_pht_state( &no22, NO22_PIN_STATE_LOW );

    if ( error_data == NO22_DEVICE_ERROR )
    {
        log_printf( &logger, "Device error \r\n" );
        for ( ; ; );
    }

    log_printf( &logger, "***** App init ***** \r\n" );
}
  

Application Task

Measures in span of 1 seconc ppb of NO2

void application_task ( )
{
    uint16_t temp_data_read;
    float data_ppb;
    
    temp_data_read = no22_read_data( &no22 );
    log_printf( &logger, "ADC: %d \n\r", temp_data_read );
    
    data_ppb = no22_get_ppb( &no22 );
    log_printf( &logger, "PPB: %f \r\n", data_ppb );
    
    log_printf( &logger, "___________________________\r\n" );
    
    Delay_ms ( 1000 );
} 

The full application code, and ready to use projects can be installed directly form compilers IDE(recommneded) or found on LibStock page or mikroE GitHub accaunt.

Other mikroE Libraries used in the example:

• MikroSDK.Board
• MikroSDK.Log
• Click.NO22

Additional notes and informations

Depending on the development board you are using, you may need USB UART click, USB UART 2 Click or RS232 Click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all Mikroelektronika compilers, or any other terminal application of your choice, can be used to read the message.

---