Power on, sprog as command station, no track power

[renaudtrain]

Hi,

I have a problem with both my SPROG III modules:
On JMRI, In operation mode, with power off, both SPROG leds are on, stable.
When I turn the power on, The USB side LED is off and the power side LED is blinking. There is no power in the track (a single piece of track for that matter).

Any idea?

Thanks
Renaud

[danielb987]

@renaudtrain
Welcome to the JMRI project!

I suggest that you ask that question on the JMRI users group. There are many more people on that list to help you, than reading these issues.
Browse or join the JMRI Users Groups.io Group

[renaudtrain]

Will do. Thanks a lot. I thought I was there.

[danielb987]

@renaudtrain
Is this issue completed? If so, it would be good if it could be closed.
Thanks.

[renaudtrain]

Hi, No. I did not get answers. But I suspect a hardware or firmware issue with the sprog modules. I wrote to SPROG directly. I am waiting for an answer. Please leave the issue open, in case someone reacts in the group and so that I can report the answer from SPROG. Thanks Renaud

…

Le 30.05.2024 à 01:49, Daniel ***@***.***> a écrit : @renaudtrain <https://github.com/renaudtrain> Is this issue completed? If so, it would be good if it could be closed. Thanks. — Reply to this email directly, view it on GitHub <#13117 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BHPBT3ZB5RICMU263AGMEELZEZSPBAVCNFSM6AAAAABIHSYCMGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMZYGQZDOOJVGM>. You are receiving this because you were mentioned.

[PUlvestad]

Renaud,
I recommend you join the Sprog-DCC users group.
https://groups.io/g/sprog-dcc
Peter