Incorrect silkscreen

[pepsi-zero]

I have started with the Marco Keyboard Budget version.
The silk screen has some errors
It states 1k resistor's, where the schematic has 10k resistors
The 1.3 screen has gnd-vcc-scl-sda as your silkscreen has vcc-gnd-scl-sda

Also you are talking about V1 but on the youtube video it is v2
In the youtube video you mention switches and that you come back to it later. But you never do.
During that part you show a Cherry MX style switch that will not fit

The BOM does not have the select switch. And the dimensions for the screw terminal

[pepsi-zero]

Of the 20 OLED screens I found one with the same pinout you have… At the bottom of the stack. Because of the strange pinout.

So that leaves the 10K resistor in the silkscreen.