Cant connect bluepill board to FreeJoyConfiguratorQt

[Masonator3000]

I flashed the firmware using the ST-LINK Utility then plugged into my computer. Windows starts setting it up and it shows up as FreeJoy v1.7.1 in FreeJoyConfiguratorQt but it shows as disconnected.

[Reksotiv]

configurator is also version 1.7.1?
try flashing FreeJoy_v1_7_1b0, open Game Controllers -> FreeJoy -> Properties -> Test tab. Touch pins a0-a3, do the axes stand still or move like on the gif?

[Masonator3000]

After Flashing version 1_7_1b0 I can get the axis to move like in the gif.

[Reksotiv]

try this version
FreeJoyQt.zip

everything as in the screenshot or not?

[Masonator3000]

It shows two devices but it is still showing as disconnected.

[Reksotiv]

Have you tried selecting a second device?

[Masonator3000]

I solved my issue. My computer is not close to my monitors so I use a USB over ethernet extender and for some reason freejoy does not like that. When i plugged the bluepill directly into my computer it started working fine.

[Reksotiv]

can you please test version 1.7.0? if it works, what is your packet speed? should be 16ms
Firmware
Configurator

I have a similar problem with VoСore display in my steering wheel but freejoy works fine. I am using 5m usb cable + 2.5m spiral cable and the display is not working. If i add usb hub after 5m usb cable everything works fine