Issue with Add-on: Climate - In dual mode, there are two separate set-points, unable to control heat using "-" & "+" buttons.

[zembrzycki]

TFT Version

4.3.7

ESPHome Version

4.3.7

Blueprint Version

4.3.7

Panel Model

US

What is the bug?

While running addon_climate_dual, and heat is selected, the "+" & "-" buttons on the climate card adjust the cooling temperature opposed to the heating temperature. (buttons only control cooling set-point regardless of mode)

When in heat mode, it is not necessary to display a cool set-point temperature, likewise, when in cool mode, it is not necessary to display a heat set-point temperature. Displaying a single set point is all that is actually required in these modes.

Steps to Reproduce

IMG_8197.2.mov

Your Panel's YAML

::: ESP :::::.....
substitutions:
  # Settings - Editable values
  device_name: "nsp3" 

  # Add-on configuration (if needed)
  ## Add-on climate
  heater_relay: "1"     # Possible values: "1" or "2"
  cooler_relay: "1"     # Possible values: "1" or "2"
  temp_units: "°F"      # Temperatures in Fahrenheit
  min_off_time: "3"     # Minimum duration (in seconds) the cooling/heating action must be disengaged before it may be engaged.
  min_run_time: "3"     # Minimum duration (in seconds) the cooling/heating action must be engaged before it may be disengaged.
  min_idle_time: "3"    # Minimum duration (in seconds) the idle action must be active before calling another climate action.
  temp_min: "65"        # Min supported temperature is 40°F
  temp_max: "80"        # Max supported temperature is 80°F
  temp_step: "1"        # Temperature granularity is 1°F
  cool_deadband: "1"    # Temperature delta before engaging cooling
  cool_overrun: "0.5"   # Temperature delta before disengaging cooling
  heat_deadband: "1"    # Temperature delta before engaging heat
  heat_overrun: "0.5"   # Temperature delta before disengaging heat
  target_low: "74"      # The initial lower treshold for the target temperature.
  target_high: "74"     # The initial higher treshold for the target temperature.

wifi:
  fast_connect: "on"
  power_save_mode: "none"

# Basic and optional configurations
packages:
  remote_package:
    url: https://github.com/Blackymas/NSPanel_HA_Blueprint
    ref: main
    files:
      - nspanel_esphome.yaml # Basic package
      # Optional advanced and add-on configurations
      # - esphome/nspanel_esphome_advanced.yaml
      #- nspanel_esphome_addon_climate_cool.yaml
      # - nspanel_esphome_addon_climate_heat.yaml
      - nspanel_esphome_addon_climate_dual.yaml
    refresh: 300s
    



::: Blueprint :::::.....
alias: NSP3
description: ""
use_blueprint:
  path: Blackymas/nspanel_blueprint.yaml
  input:
    nspanel_name: cee07557644ad4dee9455d1d8115fdcf
    date_format: "%A, %-m/%-d"
    timezone: America/New_York (EST5EDT,M3.2.0,M11.1.0)
    weather_entity: weather.beacon
    climate: climate.nsp3_thermostat
    home_indoor_temp_icon: mdi:home-thermometer-outline
    climate_chip_always_visible: true
    home_indoor_temp_visible: true
    outdoortemp: sensor.lumi_weather_outdoor_temperature
    time_format: "%-I:%M %p"
    home_value01: sensor.nsp_setpoint
    home_outdoor_temp_label_color:
      - 255
      - 38
      - 0
    left_button_entity: script.temperature_down
    left_button_name: Down
    right_button_entity: script.temperature_up
    right_button_name: Up
    hw_button_bar_left_always_show: false
    hw_button_bar_right_always_show: false
    hw_buttons_bars_pages:
      - "2"
      - "512"
      - "134217728"
      - "124"
      - "128"
    home_custom_button01: switch.nsp3_relay_2
    home_custom_button01_name: Stage-2
    home_custom_button01_icon: mdi:fan-speed-2
    screensaver_display_time: true

ESPHome Logs

INFO ESPHome 2024.4.2
INFO Reading configuration /config/esphome/nsp3.yaml...
INFO Detected timezone 'America/New_York'
INFO Starting log output from 10.10.10.27 using esphome API
INFO Successfully connected to nsp3 @ 10.10.10.27 in 0.010s
INFO Successful handshake with nsp3 @ 10.10.10.27 in 0.037s
[14:43:35][I][app:100]: ESPHome version 2024.4.2 compiled on May 2 2024, 14:30:27
[14:43:35][C][wifi:580]: WiFi:
[14:43:35][C][wifi:408]: Local MAC: 08:D1:F9:A3:8A:7C
[14:43:35][C][wifi:413]: SSID: 'Orange'[redacted]
[14:43:35][C][wifi:416]: IP Address: 10.10.10.27
[14:43:35][C][wifi:420]: BSSID: 08:45:D1:0C:0D:61[redacted]
[14:43:35][C][wifi:421]: Hostname: 'nsp3'
[14:43:35][C][wifi:423]: Signal strength: -46 dB ▂▄▆█
[14:43:35][C][wifi:427]: Channel: 6
[14:43:35][C][wifi:428]: Subnet: 255.255.255.192
[14:43:35][C][wifi:429]: Gateway: 10.10.10.1
[14:43:35][C][wifi:430]: DNS1: 10.10.10.10
[14:43:35][C][wifi:431]: DNS2: 0.0.0.0
[14:43:35][C][logger:166]: Logger:
[14:43:35][C][logger:167]: Level: DEBUG
[14:43:35][C][logger:169]: Log Baud Rate: 0
[14:43:35][C][logger:170]: Hardware UART: UART0
[14:43:35][C][uart.idf:139]: UART Bus 0:
[14:43:35][C][uart.idf:140]: TX Pin: GPIO16
[14:43:35][C][uart.idf:141]: RX Pin: GPIO17
[14:43:35][C][uart.idf:143]: RX Buffer Size: 256
[14:43:35][C][uart.idf:145]: Baud Rate: 115200 baud
[14:43:35][C][uart.idf:146]: Data Bits: 8
[14:43:35][C][uart.idf:147]: Parity: NONE
[14:43:35][C][uart.idf:148]: Stop bits: 1
[14:43:35][C][ledc.output:173]: LEDC Output:
[14:43:35][C][ledc.output:174]: Pin GPIO21
[14:43:35][C][ledc.output:175]: LEDC Channel: 0
[14:43:35][C][ledc.output:176]: PWM Frequency: 1319.0 Hz
[14:43:35][C][ledc.output:177]: Phase angle: 0.0°
[14:43:35][C][ledc.output:178]: Bit depth: 15
[14:43:35][C][template.binary_sensor:028]: Template Binary Sensor 'Nextion display'
[14:43:35][C][template.binary_sensor:028]: Device Class: 'connectivity'
[14:43:35][C][template.number:050]: Template Number 'Display Brightness'
[14:43:35][C][template.number:050]: Unit of Measurement: '%'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.number:050]: Template Number 'Display Brightness Dimdown'
[14:43:35][C][template.number:050]: Unit of Measurement: '%'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.number:050]: Template Number 'Display Brightness Sleep'
[14:43:35][C][template.number:050]: Unit of Measurement: '%'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.number:050]: Template Number 'Temperature Correction'
[14:43:35][C][template.number:050]: Unit of Measurement: '°C'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.number:050]: Template Number 'Timeout Page'
[14:43:35][C][template.number:050]: Icon: 'mdi:timer'
[14:43:35][C][template.number:050]: Unit of Measurement: 's'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.number:050]: Template Number 'Timeout Dimming'
[14:43:35][C][template.number:050]: Icon: 'mdi:timer'
[14:43:35][C][template.number:050]: Unit of Measurement: 's'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.number:050]: Template Number 'Timeout Sleep'
[14:43:35][C][template.number:050]: Icon: 'mdi:timer'
[14:43:35][C][template.number:050]: Unit of Measurement: 's'
[14:43:35][C][template.number:051]: Optimistic: YES
[14:43:35][C][template.number:052]: Update Interval: 60.0s
[14:43:35][C][template.select:065]: Template Select 'Baud rate'
[14:43:35][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[14:43:35][C][template.select:066]: Update Interval: 60.0s
[14:43:35][C][template.select:069]: Optimistic: YES
[14:43:35][C][template.select:070]: Initial Option: 115200
[14:43:35][C][template.select:071]: Restore Value: YES
[14:43:35][C][template.select:065]: Template Select 'Wake-up page'
[14:43:35][C][template.select:065]: Icon: 'mdi:page-next-outline'
[14:43:35][C][template.select:066]: Update Interval: 60.0s
[14:43:35][C][template.select:069]: Optimistic: YES
[14:43:35][C][template.select:070]: Initial Option: home
[14:43:35][C][template.select:071]: Restore Value: YES
[14:43:35][C][template.select:065]: Template Select 'Update TFT display - Model'
[14:43:35][C][template.select:065]: Icon: 'mdi:file-sync'
[14:43:35][C][template.select:066]: Update Interval: 60.0s
[14:43:35][C][template.select:069]: Optimistic: YES
[14:43:35][C][template.select:070]: Initial Option: NSPanel EU
[14:43:35][C][template.select:071]: Restore Value: YES
[14:43:35][C][template.select:065]: Template Select 'Update TFT display - Baud rate'
[14:43:35][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[14:43:35][C][template.select:066]: Update Interval: 60.0s
[14:43:35][C][template.select:069]: Optimistic: YES
[14:43:35][C][template.select:070]: Initial Option: 921600
[14:43:35][C][template.select:071]: Restore Value: YES
[14:43:35][C][switch.gpio:068]: GPIO Switch 'Nextion display - Power'
[14:43:35][C][switch.gpio:091]: Restore Mode: always ON
[14:43:35][C][switch.gpio:031]: Pin: GPIO4
[14:43:35][C][template.text_sensor:020]: Template Sensor 'Device Name'
[14:43:35][C][template.text_sensor:020]: Icon: 'mdi:identifier'
[14:43:35][C][template.text_sensor:020]: Template Sensor 'Detailed Entity'
[14:43:35][C][template.text_sensor:020]: Icon: 'mdi:tablet-dashboard'
[14:43:35][C][template.text_sensor:020]: Template Sensor 'Notification Label'
[14:43:35][C][template.text_sensor:020]: Template Sensor 'Notification Text'
[14:43:35][C][template.text_sensor:020]: Template Sensor 'Version Blueprint'
[14:43:35][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[14:43:35][C][template.text_sensor:020]: Template Sensor 'Version ESPHome'
[14:43:35][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[14:43:35][C][template.sensor:022]: Template Sensor 'Blueprint'
[14:43:35][C][template.sensor:022]: State Class: ''
[14:43:35][C][template.sensor:022]: Unit of Measurement: '%'
[14:43:35][C][template.sensor:022]: Accuracy Decimals: 1
[14:43:35][C][template.sensor:022]: Icon: 'mdi:link-variant'
[14:43:35][C][template.sensor:023]: Update Interval: 60.0s
[14:43:35][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Left Button'
[14:43:35][C][gpio.binary_sensor:016]: Pin: GPIO14
[14:43:35][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Right Button'
[14:43:35][C][gpio.binary_sensor:016]: Pin: GPIO27
[14:43:35][C][switch.gpio:068]: GPIO Switch 'Relay 1'
[14:43:35][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[14:43:35][C][switch.gpio:031]: Pin: GPIO22
[14:43:35][C][switch.gpio:068]: GPIO Switch 'Relay 2'
[14:43:35][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[14:43:35][C][switch.gpio:031]: Pin: GPIO19
[14:43:35][C][template.switch:068]: Template Switch 'Notification unread'
[14:43:35][C][template.switch:091]: Restore Mode: always OFF
[14:43:35][C][template.switch:057]: Optimistic: YES
[14:43:35][C][template.switch:068]: Template Switch 'Notification sound'
[14:43:35][C][template.switch:091]: Restore Mode: restore defaults to OFF
[14:43:35][C][template.switch:057]: Optimistic: YES
[14:43:35][C][template.switch:068]: Template Switch 'Relay 0 (dummy)'
[14:43:35][C][template.switch:091]: Restore Mode: always OFF
[14:43:35][C][template.switch:057]: Optimistic: YES
[14:43:35][C][psram:020]: PSRAM:
[14:43:35][C][psram:021]: Available: YES
[14:43:35][C][psram:024]: Size: 2036 KB
[14:43:35][C][rtttl:029]: Rtttl
[14:43:35][C][nextion:128]: Nextion:
[14:43:35][C][nextion:129]: Device Model: NX4832F035_011C
[14:43:35][C][nextion:130]: Firmware Version: 72
[14:43:35][C][nextion:131]: Serial Number: 6BB3340171CFCB79
[14:43:35][C][nextion:132]: Flash Size: 16777216
[14:43:35][C][nextion:133]: Wake On Touch: YES
[14:43:35][C][nextion:134]: Exit reparse: YES
[14:43:35][C][factory_reset.button:011]: Factory Reset Button 'Factory reset'
[14:43:35][C][factory_reset.button:011]: Icon: 'mdi:restart-alert'
[14:43:35][C][restart.button:017]: Restart Button 'Restart'
[14:43:35][C][adc:097]: ADC Sensor 'ntc_source'
[14:43:35][C][adc:097]: Device Class: 'voltage'
[14:43:35][C][adc:097]: State Class: 'measurement'
[14:43:35][C][adc:097]: Unit of Measurement: 'V'
[14:43:35][C][adc:097]: Accuracy Decimals: 2
[14:43:35][C][adc:107]: Pin: GPIO38
[14:43:35][C][adc:122]: Attenuation: 11db
[14:43:35][C][adc:141]: Samples: 4
[14:43:36][C][adc:142]: Update Interval: 10.0s
[14:43:36][C][resistance:010]: Resistance Sensor 'resistance_sensor'
[14:43:36][C][resistance:010]: State Class: 'measurement'
[14:43:36][C][resistance:010]: Unit of Measurement: 'Ω'
[14:43:36][C][resistance:010]: Accuracy Decimals: 1
[14:43:36][C][resistance:010]: Icon: 'mdi:flash'
[14:43:36][C][resistance:011]: Configuration: DOWNSTREAM
[14:43:36][C][resistance:012]: Resistor: 11200.00Ω
[14:43:36][C][resistance:013]: Reference Voltage: 3.3V
[14:43:36][C][ntc:014]: NTC Sensor 'Temperature'
[14:43:36][C][ntc:014]: Device Class: 'temperature'
[14:43:36][C][ntc:014]: State Class: 'measurement'
[14:43:36][C][ntc:014]: Unit of Measurement: '°C'
[14:43:36][C][ntc:014]: Accuracy Decimals: 1
[14:43:36][C][thermostat.climate:1290]: Thermostat 'Thermostat'
[14:43:36][C][thermostat.climate:1293]: Minimum Set Point Differential: 0.5°C
[14:43:36][C][thermostat.climate:1295]: Start-up Delay Enabled: NO
[14:43:36][C][thermostat.climate:1297]: Cooling Parameters:
[14:43:36][C][thermostat.climate:1298]: Deadband: 0.6°C
[14:43:36][C][thermostat.climate:1299]: Overrun: 0.3°C
[14:43:36][C][thermostat.climate:1306]: Minimum Off Time: 3s
[14:43:36][C][thermostat.climate:1308]: Minimum Run Time: 3s
[14:43:36][C][thermostat.climate:1311]: Heating Parameters:
[14:43:36][C][thermostat.climate:1312]: Deadband: 0.6°C
[14:43:36][C][thermostat.climate:1313]: Overrun: 0.3°C
[14:43:36][C][thermostat.climate:1320]: Minimum Off Time: 3s
[14:43:36][C][thermostat.climate:1322]: Minimum Run Time: 3s
[14:43:36][C][thermostat.climate:1337]: Minimum Idle Time: 3s
[14:43:36][C][thermostat.climate:1338]: Supports AUTO: NO
[14:43:36][C][thermostat.climate:1339]: Supports HEAT/COOL: YES
[14:43:36][C][thermostat.climate:1340]: Supports COOL: YES
[14:43:36][C][thermostat.climate:1341]: Supports DRY: NO
[14:43:36][C][thermostat.climate:1342]: Supports FAN_ONLY: NO
[14:43:36][C][thermostat.climate:1344]: Supports FAN_ONLY_ACTION_USES_FAN_MODE_TIMER: NO
[14:43:36][C][thermostat.climate:1345]: Supports FAN_ONLY_COOLING: NO
[14:43:36][C][thermostat.climate:1347]: Supports FAN_WITH_COOLING: NO
[14:43:36][C][thermostat.climate:1350]: Supports FAN_WITH_HEATING: NO
[14:43:36][C][thermostat.climate:1352]: Supports HEAT: YES
[14:43:36][C][thermostat.climate:1353]: Supports FAN MODE ON: NO
[14:43:36][C][thermostat.climate:1354]: Supports FAN MODE OFF: NO
[14:43:36][C][thermostat.climate:1355]: Supports FAN MODE AUTO: NO
[14:43:36][C][thermostat.climate:1356]: Supports FAN MODE LOW: NO
[14:43:36][C][thermostat.climate:1357]: Supports FAN MODE MEDIUM: NO
[14:43:36][C][thermostat.climate:1358]: Supports FAN MODE HIGH: NO
[14:43:36][C][thermostat.climate:1359]: Supports FAN MODE MIDDLE: NO
[14:43:36][C][thermostat.climate:1360]: Supports FAN MODE FOCUS: NO
[14:43:36][C][thermostat.climate:1361]: Supports FAN MODE DIFFUSE: NO
[14:43:36][C][thermostat.climate:972]: HOME Default Target Temperature High: 23.3°C
[14:43:36][C][thermostat.climate:980]: HOME Default Mode: HEAT_COOL
[14:43:36][C][homeassistant.time:010]: Home Assistant Time:
[14:43:36][C][homeassistant.time:011]: Timezone: 'EST5EDT,M3.2.0,M11.1.0'
[14:43:36][C][mdns:115]: mDNS:
[14:43:36][C][mdns:116]: Hostname: nsp3
[14:43:36][C][ota:096]: Over-The-Air Updates:
[14:43:36][C][ota:097]: Address: nsp3.7p.net:3232
[14:43:36][C][ota:100]: Using Password.
[14:43:36][C][ota:103]: OTA version: 2.
[14:43:36][C][api:139]: API Server:
[14:43:36][C][api:140]: Address: nsp3.7p.net:6053
[14:43:36][C][api:144]: Using noise encryption: NO
[14:43:36][C][wifi_signal.sensor:009]: WiFi Signal 'RSSI'
[14:43:36][C][wifi_signal.sensor:009]: Device Class: 'signal_strength'
[14:43:36][C][wifi_signal.sensor:009]: State Class: 'measurement'
[14:43:36][C][wifi_signal.sensor:009]: Unit of Measurement: 'dBm'
[14:43:36][C][wifi_signal.sensor:009]: Accuracy Decimals: 0
[14:43:36][C][wifi_signal.sensor:009]: Icon: 'mdi:wifi'
[14:43:44][D][sensor:094]: 'ntc_source': Sending state 1.57900 V with 2 decimals of accuracy
[14:43:44][D][resistance:039]: 'resistance_sensor' - Resistance 10275.9Ω
[14:43:44][D][sensor:094]: 'resistance_sensor': Sending state 10275.88574 Ω with 1 decimals of accuracy
[14:43:44][D][ntc:026]: 'Temperature' - Temperature: 24.4°C
[14:43:44][D][sensor:094]: 'Temperature': Sending state 24.38879 °C with 1 decimals of accuracy
[14:43:44][D][climate:396]: 'Thermostat' - Sending state:
[14:43:44][D][climate:399]: Mode: HEAT
[14:43:44][D][climate:401]: Action: IDLE
[14:43:44][D][climate:410]: Preset: HOME
[14:43:44][D][climate:419]: Current Temperature: 24.39°C
[14:43:44][D][climate:423]: Target Temperature: Low: 21.17°C High: 23.89°C
[14:43:44][W][component:237]: Component adc.sensor took a long time for an operation (108 ms).
[14:43:44][W][component:238]: Components should block for at most 30 ms.
[14:43:45][C][nspanel_ha_blueprint:2187]: Wi-Fi: Excellent (-48 dBm)
[14:43:45][C][nspanel_ha_blueprint:2198]: API: Connected
[14:43:45][C][nspanel_ha_blueprint:2206]: Blueprint:
[14:43:45][C][nspanel_ha_blueprint:2208]: Version: 4.3.7
[14:43:45][C][nspanel_ha_blueprint:2209]: Init steps: 62 (100.0%)
[14:43:45][C][nspanel_ha_blueprint:2218]: ESPHome:
[14:43:45][C][nspanel_ha_blueprint:2219]: Version: 4.3.7
[14:43:45][C][nspanel_ha_blueprint:2220]: Compiler: 2024.4.2
[14:43:45][C][nspanel_ha_blueprint:2225]: Framework: ESP-IDF
[14:43:45][C][nspanel_ha_blueprint:2230]: Free heap:
[14:43:45][C][nspanel_ha_blueprint:2234]: Internal: 199996 bytes (56.9%)
[14:43:45][C][nspanel_ha_blueprint:2244]: PSRAM: 2008403 bytes (96.3%)
[14:43:45][C][nspanel_ha_blueprint:2251]: UART:
[14:43:45][C][nspanel_ha_blueprint:2252]: Baud rate: 115200 bps
[14:43:45][C][nspanel_ha_blueprint:2253]: Queue size: 0
[14:43:45][C][nspanel_ha_blueprint:2257]: Nextion:
[14:43:45][C][nspanel_ha_blueprint:2258]: Queue size: 0
[14:43:45][C][nspanel_ha_blueprint:2260]: Is setup: True
[14:43:45][C][nspanel_ha_blueprint:2267]: Init: True
[14:43:45][C][nspanel_ha_blueprint:2273]: TFT: 4.3.6
[14:43:45][C][nspanel_ha_blueprint:2274]: Packages:
[14:43:45][C][nspanel_ha_blueprint:2276]: - Core
[14:43:45][C][nspanel_ha_blueprint:2285]: - Upload TFT
[14:43:45][C][nspanel_ha_blueprint:2288]: - Climate - Base
[14:43:45][C][nspanel_ha_blueprint:2294]: - Climate - Dual
[14:43:45][C][nspanel_ha_blueprint:097]: Add-on Upload TFT:
[14:43:45][C][nspanel_ha_blueprint:098]: File model: NSPanel US
[14:43:45][C][nspanel_ha_blueprint:099]: Valid TFT: YES
[14:43:45][C][nspanel_ha_blueprint:133]: Add-on climate:
[14:43:45][C][nspanel_ha_blueprint:149]: Dual: Enabled
[14:43:45][C][nspanel_ha_blueprint:151]: Relay (cooler): 1
[14:43:45][C][nspanel_ha_blueprint:155]: Relay (heater): 1
[14:43:47][D][nextion:457]: Got touch event:
[14:43:47][D][nextion:458]: page_id: 7
[14:43:47][D][nextion:459]: component_id: 5
[14:43:47][D][nextion:460]: event type: PRESS
[14:43:47][D][script:077]: Script 'timer_page' restarting (mode: restart)
[14:43:47][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[14:43:47][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[14:43:48][D][nextion:457]: Got touch event:
[14:43:48][D][nextion:458]: page_id: 7
[14:43:48][D][nextion:459]: component_id: 5
[14:43:48][D][nextion:460]: event type: RELEASE
[14:43:48][D][script:077]: Script 'timer_page' restarting (mode: restart)
[14:43:48][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[14:43:48][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[14:43:49][D][text_sensor:064]: 'NSPanel local event': Sending state '{"page": "climate", "key": "target_temp_high", "value": 760, "embedded": 1}'
[14:43:49][D][climate:011]: 'Thermostat' - Setting
[14:43:49][D][climate:046]: Target Temperature High: 24.44
[14:43:49][D][climate:396]: 'Thermostat' - Sending state:
[14:43:49][D][climate:399]: Mode: HEAT
[14:43:49][D][climate:401]: Action: IDLE
[14:43:49][D][climate:410]: Preset: HOME
[14:43:49][D][climate:419]: Current Temperature: 24.39°C
[14:43:49][D][climate:423]: Target Temperature: Low: 21.17°C High: 24.44°C
[14:43:49][D][nextion_textsensor:014]: Processed text_sensor "localevent" state "{"page": "climate", "key": "target_temp_high", "value": 760, "embedded": 1}"
[14:43:49][W][component:237]: Component display took a long time for an operation (117 ms).
[14:43:49][W][component:238]: Components should block for at most 30 ms.
[14:43:52][D][nextion:457]: Got touch event:
[14:43:52][D][nextion:458]: page_id: 7
[14:43:52][D][nextion:459]: component_id: 5
[14:43:52][D][nextion:460]: event type: PRESS
[14:43:52][D][script:077]: Script 'timer_page' restarting (mode: restart)
[14:43:52][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[14:43:52][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[14:43:52][D][nextion:457]: Got touch event:
[14:43:52][D][nextion:458]: page_id: 7
[14:43:52][D][nextion:459]: component_id: 5
[14:43:52][D][nextion:460]: event type: RELEASE
[14:43:52][D][script:077]: Script 'timer_page' restarting (mode: restart)
[14:43:52][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[14:43:52][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[14:43:53][D][text_sensor:064]: 'NSPanel local event': Sending state '{"page": "climate", "key": "target_temp_high", "value": 770, "embedded": 1}'
[14:43:53][D][climate:011]: 'Thermostat' - Setting
[14:43:53][D][climate:046]: Target Temperature High: 25.00
[14:43:53][D][climate:396]: 'Thermostat' - Sending state:
[14:43:53][D][climate:399]: Mode: HEAT
[14:43:53][D][climate:401]: Action: IDLE
[14:43:53][D][climate:410]: Preset: HOME
[14:43:53][D][climate:419]: Current Temperature: 24.39°C
[14:43:53][D][climate:423]: Target Temperature: Low: 21.17°C High: 25.00°C
[14:43:54][D][nextion_textsensor:014]: Processed text_sensor "localevent" state "{"page": "climate", "key": "target_temp_high", "value": 770, "embedded": 1}"
[14:43:54][W][component:237]: Component display took a long time for an operation (114 ms).
[14:43:54][W][component:238]: Components should block for at most 30 ms.
[14:43:54][D][sensor:094]: 'ntc_source': Sending state 1.57867 V with 2 decimals of accuracy
[14:43:54][D][resistance:039]: 'resistance_sensor' - Resistance 10271.7Ω
[14:43:54][D][sensor:094]: 'resistance_sensor': Sending state 10271.72754 Ω with 1 decimals of accuracy
[14:43:54][D][ntc:026]: 'Temperature' - Temperature: 24.4°C
[14:43:54][D][sensor:094]: 'Temperature': Sending state 24.39786 °C with 1 decimals of accuracy
[14:43:54][D][climate:396]: 'Thermostat' - Sending state:
[14:43:54][D][climate:399]: Mode: HEAT
[14:43:54][D][climate:401]: Action: IDLE
[14:43:54][D][climate:410]: Preset: HOME
[14:43:54][D][climate:419]: Current Temperature: 24.40°C
[14:43:54][D][climate:423]: Target Temperature: Low: 21.17°C High: 25.00°C
[14:43:54][W][component:237]: Component adc.sensor took a long time for an operation (109 ms).
[14:43:54][W][component:238]: Components should block for at most 30 ms.
[14:43:57][D][nextion:457]: Got touch event:
[14:43:57][D][nextion:458]: page_id: 7
[14:43:57][D][nextion:459]: component_id: 5
[14:43:57][D][nextion:460]: event type: PRESS
[14:43:57][D][script:077]: Script 'timer_page' restarting (mode: restart)
[14:43:57][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[14:43:57][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[14:43:57][D][nextion:457]: Got touch event:
[14:43:57][D][nextion:458]: page_id: 7
[14:43:57][D][nextion:459]: component_id: 5
[14:43:57][D][nextion:460]: event type: RELEASE
[14:43:57][D][script:077]: Script 'timer_page' restarting (mode: restart)
[14:43:57][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[14:43:57][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[14:43:58][D][text_sensor:064]: 'NSPanel local event': Sending state '{"page": "climate", "key": "target_temp_high", "value": 780, "embedded": 1}'
[14:43:58][D][climate:011]: 'Thermostat' - Setting
[14:43:58][D][climate:046]: Target Temperature High: 25.56
[14:43:58][D][climate:396]: 'Thermostat' - Sending state:
[14:43:58][D][climate:399]: Mode: HEAT
[14:43:58][D][climate:401]: Action: IDLE
[14:43:58][D][climate:410]: Preset: HOME
[14:43:58][D][climate:419]: Current Temperature: 24.40°C
[14:43:58][D][climate:423]: Target Temperature: Low: 21.17°C High: 25.56°C
[14:43:58][D][nextion_textsensor:014]: Processed text_sensor "localevent" state "{"page": "climate", "key": "target_temp_high", "value": 780, "embedded": 1}"
[14:43:58][W][component:237]: Component display took a long time for an operation (125 ms).
[14:43:58][W][component:238]: Components should block for at most 30 ms.
[14:43:59][D][text_sensor:064]: 'Device Name': Sending state 'nsp3'
[14:44:01][D][esp32.preferences:114]: Saving 1 preferences to flash...
[14:44:01][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed

Home Assistant Logs

No response

[edwardtfn]

If you click on the lower selector or the lower temp indicator (the one showing 66°) then it shoukd alternate the +/- controller to the lower temperature.

[edwardtfn]

Hey @zembrzycki, have my suggestion worked for you?

[zembrzycki]

I just loaded the dual code again, and confirmed, I was able to change the individual temperatures by first pressing the specific target temperature.

However, I still think it's a little odd to have both (heat and cool) temperatures displayed while in a specific mode (heat or cool), there is no need or purpose to display both and is thus rather unintuitive.

I may decide to upload the heat code in the winter months and the cooling code in the summer months just to appease my preferences and make the interface cleaner and more intuitive.

Anyway, as always I appreciate your time and effort you put into the project as well and your response to instruct me to use.

Just to let you know about my use case:
I have been using this as a replacement to my Google Nest, for a water chilled AC/Heating system, where HA will switch the thermostat into the correct (heat or cool) mode dependent on the temperature of the supply water. The system is really just a motorised valve and a fan that blows through a radiator coil where water is either heated or cooled by a central system managed my the condo building. The building will switch between heated or chilled water throughout the seasons, but if the building is in chilled water mode, and if the thermostat tries to call for heat, it will just continue to run the system and never achieve the set point, so swing mode is not really something that I can use, allowing the thermostat to decide to call for heat or cool on its own is not possible. This issue breaks the logic of a lot of off the shelf thermostats. I use relay 1 for the simple on/off of the cooling system and I use relay 2 to select the motor winding to use for my multi speed fan motor. May be referred to as Stage 2 in traditional HVAC systems. Furthermore, I do not really need to wait any time between cycles, as there is no compressor unit to control, as it basically runs all the time as it services the entire building. After running this solution for the last month, I feel it gives me more consistency in the condo's temperature, as I am able to run shorter cycles, whereas the Nest logic attempts to to run longer cycles because its better for the compressor.